User manual NEW POL XV185CEL

[. . . ] Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Switch the vacuum cleaner off on the body of the machine before unplugging from the electrical outlet. Disconnect the plug from the electrical outlet before changing the dust bag or dust container. [. . . ] To avoid damage, please remove the plug by grasping the plug itself, not by pulling on the cord. This appliance is not intended for use by young children or infirm persons without supervision unless they are adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance. The plug must be removed from the socket outlet before cleaning or maintaining the appliance. If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Turn off the power switch before unplugging. 1 1 ASSEMBLING THE CLEANER OPTION OPTION Features may vary according to model. Refer to 5, 6 page. CAUTION Please do not press the button of dust bin handle when carrying machine. For storage, park the floor nozzle. 2 2 OPERATING THE CLEANER 2-1. In this case, clean the drum with care. 1 2 3 Remove waste matter Remove the brushbar such as dust and hair Push the Open button of from the transparent tangled around the the transparent screen brushbar using scissors. For improved pickup of pet hair and fibre on carpets 4 5 6 Remove dust inside the brush housing using a dry duster or crevice tool. Insert brushbar into rotating belt and assemble. Click the transparent screen cover back into place to reassemble. OPTION Clogs on turbine keeps brush from turning, and in this case, take care of it. Turbine Brush Remove waste To reassemble, align the cover to the matter comfront of the main body and close. After Turn the lock button to closing the cover, ensure that the lock `UNLOCK', and remove For picking up pet hair pletely when button is turned to the `LOCK' position. and bed linen. Brush for blanket 5 3 EMPTYING THE DUST BIN 1 2 3 Once dust reaches the DUST FULL mark, empty the dust bin. Take the dust bin out by pressing the button. Separate the dust bin cover. 4 5 6 Throw the dust away in the bin. After empting the DUST BIN, remove the obstacles like hair, fur on the cap of the DUST BIN. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. - Empty into a plastic bag (recommended for asthma/allergy sufferers) OPTION NOTE You may rinse the dust bin with cold water 6 4 CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK - Please, check the dust bin and dust pack if suction is noticeably reduced or the filter check indicator lamp turns on after empting the dust bin. The lamp will illuminate to signal when suction is reduced. CLEANING THE DUST BIN 1 2 NOTE : Please, check the filter check indicator lamp (4-3) as shown in the following illustrations if the lamp is still illuminated even after cleaning the dust bin. Detach the DUST BIN. After empting the DUST BIN, remove the obstacles like hair, fur on the cap of the DUST BIN. 4-3. CHECKING THE FILTER CHECK INDICATOR LAMP Turn the vacuum power to 'MAX' HANDLE CONTROL BODY CONTROL If the filter check indicator turns red with the inlet floating 10cm above flat floor, clean the DUST PACK. 7 4-4. CLEANING THE DUST PACK 1 2 3 Remove the dust bin and dust pack as shown. Remove the fixed frame of the dust pack cover. Remove the sponge and filter from the dust pack. 4 5 6 Wash the sponge and the filter of the dust pack with water. Let the sponge and filter dry in the shade for more than 12 hours. Put the sponge and filter into the dust pack. 7 8 Before reassembly, align the dust pack cover and dust pack correctly. Put the assembled dust pack into the main body. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. [. . . ] CHECKING THE FILTER CHECK INDICATOR LAMP Turn the vacuum power to 'MAX' HANDLE CONTROL BODY CONTROL If the filter check indicator turns red with the inlet floating 10cm above flat floor, clean the DUST PACK. 7 4-4. CLEANING THE DUST PACK 1 2 3 Remove the dust bin and dust pack as shown. Remove the fixed frame of the dust pack cover. Remove the sponge and filter from the dust pack. 4 5 6 Wash the sponge and the filter of the dust pack with water. Let the sponge and filter dry in the shade for more than 12 hours. Put the sponge and filter into the dust pack. 7 8 Before reassembly, align the dust pack cover and dust pack correctly. Put the assembled dust pack into the main body. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. 8 5 CLEANING THE MOTOR PROTECTION FILTER Take out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner. [. . . ]