User manual NETGEAR WNR3500LV2

[. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. To register your product, get the latest product updates, or get support online, visit us at http://support. Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders. [. . . ] You can use the Check button on the Router Update screen to check and update to the latest firmware for your product if new firmware is available. Click Yes to update and locate the firmware you downloaded (the file ends in . When uploading firmware to the router, do not interrupt the Web browser by closing the window, clicking a link, or loading a new page. Read the new firmware release notes to determine whether or not you need to reconfigure the router after upgrading. Administration 62 N300 Wireless Gigabit Router WNR3500Lv2 View Router Status To view router status and usage information, select Advanced Home, or select Administration > Router Status to display the following screen: Router Information Hardware Version. This is the unique physical address being used by the Ethernet (LAN) port of the router. Identifies whether the router’s built-in DHCP server is active for the LAN-attached devices. This is the unique physical address being used by the Internet (WAN) port of the router. If the value is DHCP Client, the router obtains an IP address dynamically from the ISP. The IP subnet mask being used by the Internet (WAN) port of the router. administration 63 N300 Wireless Gigabit Router WNR3500Lv2 Domain Name Server. Statistics Button On the Router Status screen, in the Internet Provider (WAN) Setup pane, click the Statistics button to display the following screen: Figure 6. For each port, the screen displays: • • • • • • • • Status. The number of packets transmitted on this port since reset or manual clear. The number of packets received on this port since reset or manual clear. The current transmission (outbound) bandwidth used on the WAN and LAN ports. The current reception (inbound) bandwidth used on the WAN and LAN ports. To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval. Administration 64 N300 Wireless Gigabit Router WNR3500Lv2 Connection Status Button On the Router Status screen in the Internet Connection pane, click the Connection Status button to view connection status information. View connection status information The Release button returns the status of all items to 0. The IP address for the default gateway that the router communicates with. The IP address for the Dynamic Host Configuration Protocol server that provides the TCP/IP configuration for all the computers that are connected to the router. [. . . ] , 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the N300 Wireless Gigabit Router WNR3500Lv2 complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]