User manual NETGEAR WNDR4300

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. Phone (Other Countries): Check the list of phone numbers at http://support. [. . . ] If you use daylight savings time, select the Automatically adjust for daylight savings time check box. Security 73 N750 Wireless Dual Band Gigabit Router WNDR4300 Security Event Email Notifications To receive logs and alerts by email, provide your email information in the E-mail screen, and specify which alerts you want to receive and how often. To receive email logs and alerts from the router, select the Turn E-mail Notification On check box. In the Your Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP) mail server (such as mail. You might be able to find this information in the configuration screen of your email program. Enter the email address to which logs and alerts are sent in the Send to This E-mail Address field. If your outgoing email server requires authentication, select the My mail server requires authentication check box. Fill in the User Name and Password fields for the outgoing email server. You can have email alerts sent immediately when someone attempts to visit a blocked site, and you can specify that logs are sent automatically. If you select the Weekly, Daily, or Hourly option and the log fills up before the specified period, the log is emailed to the specified email address. After the log is sent, the log is cleared from the router’s memory. If the router cannot email the log file, the log buffer might fill up. In this case, the router overwrites the log and discards its contents. Administration M anaging your net work 8 This chapter describes the router settings for administering and maintaining your router and home network. See Remote Management on page 105 for information about upgrading or checking the status of your router over the Internet. For information about monitoring Internet traffic, see Traffic Meter on page 114. This chapter includes the following sections: • • • • • Upgrade the Firmware View Router Status View Logs of Web Access or Attempted Web Access Manage the Configuration File Set Password 75 N750 Wireless Dual Band Gigabit Router WNDR4300 Upgrade the Firmware The router firmware (routing software) is stored in flash memory. You can update the firmware from the Administration menu on the Advanced tab. You might see a message at the top of the genie screens when new firmware is available for your product. You can use the Check button on the Router Upgrade screen to check and update to the latest firmware for your product if new firmware is available. Click Yes to update and locate the firmware you downloaded (the file ends in . When uploading firmware to the router, do not interrupt the web browser by closing the window, clicking a link, or loading a new page. [. . . ] This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. , 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the N750 Wireless Dual Band Gigabit Router WNDR4300 complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. [. . . ]