User manual NETGEAR WNDR4000

[. . . ] N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual 350 East Plumeria Drive San Jose, CA 95134 USA March 2011 202-10781-02 v1. 0 N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual ©2010 NETGEAR, Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support. netgear. com. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): See Support information card. Trademarks NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are trademarks or registered trademarks of NETGEAR, Inc. [. . . ] The IP address for the default gateway that the router communicates with. The IP address for the Dynamic Host Configuration Protocol server that provides the TCP/IP configuration for all the computers that are connected to the router. The IP address of the Domain Name Service server that provides translation of network names to IP addresses. · Click the Release button to release the connection status items (that is, all items return to 0). Chapter 5. Network Maintenance | 55 N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual · · Click the Renew button to refresh the screen. Click the Close Window button to close the Connection Status screen. View Attached Devices The Attached Devices screen shows all IP devices that the wireless router has discovered on the local network. The following screen displays: For each device, the table shows the IP address, the device name if available, and the Ethernet MAC address. Note that if the wireless router is rebooted, the table data is lost until the wireless router rediscovers the devices. To force the wireless router to look for attached devices, click the Refresh button. 56 | Chapter 5. Network Maintenance 6. USB Storage 6 This chapter describes how to access and configure a USB storage drive attached to your wireless router. Figure 1. USB port on rear panel. The USB port on the wireless router can be used only to connect USB storage devices like flash drives or hard drives. Do not connect computers, USB modems, printers, CD drives, or DVD drives to the USB port. This chapter includes the following sections: · · · · · · · · · USB Drive Requirements File-Sharing Scenarios USB Storage Basic Settings Edit a Network Folder USB Storage Advanced Settings Unmount a USB Drive Approved USB Devices Connect to the USB Drive from a Remote Computer Connect to the USB Drive with Microsoft Network Settings Chapter 6. USB Storage | 57 N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual USB Drive Requirements The wireless router works with 1. 0 and 1. 1 (USB Full Speed) and 2. 0 (USB High Speed) standards. The approximate USB bus speeds are shown in the following table. Bus USB 1. 1 USB 2. 0 Speed/Second 12 Mbits 480 Mbits Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network, and other variables. The wireless router should work with USB 2. 0-compliant or 1. 1-compliant external flash and hard drives. For the most up-to-date list of USB drives supported by the wireless router, go to http://kbserver. netgear. com/readyshare/. When selecting a USB device, bear in mind the following: · · The USB port on the wireless router can be used with one USB hard drive at a time. According to the USB 2. 0 specification, the maximum available power is 5V @ 0. 5A. If a USB device exceeds this requirement, it might not function or might function erratically. The wireless router supports FAT, FAT32, NTFS (read only), and NTFS with compression format enabled (read only). · File-Sharing Scenarios You can share files on the USB drive for a wide variety of business and recreational purposes. Share Photos within Your Home Network You can create your own central storage location for photos and multimedia. This eliminates the need to log in to (and pay for) an external photo-sharing site. [. . . ] This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Declaration of Conformity We, NETGEAR, Inc. , 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the N750 Wireless Dual Band Gigabit Router WNDR4000 complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions: · This device may not cause harmful interference, and · This device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]