User manual NETGEAR WNDR3400

[. . . ] Plumeria Drive San Jose, CA 95134 USA 202-10581-02 August 2010 v1. 0 © 2010 by NETGEAR, Inc. All rights reserved. Product Registration, Support, and Documentation Register your product at http://www. NETGEAR. com/register. Registration is required before you can use our telephone support service. Product updates and Web support are always available by going to: http://www. netgear. com/support Setup documentation is available on the CD, on the support website, and on the documentation website. [. . . ] In the IP Address field, type the IP address to assign to the computer or server. (Choose an IP address from the router's LAN subnet, such as 192. 168. 1. x. ) 3. Tip: If the computer is already present on your network, you can copy its MAC address from the Attached Devices screen and paste it here. Note: The reserved address is not assigned until the next time the computer contacts the router's DHCP server. Reboot the computer or access its IP configuration and force a DHCP release and renew. Select the radio button next to the reserved address you want to edit or delete. Click Edit or Delete. Using a Dynamic DNS Service If your Internet Service Provider (ISP) gave you a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS). However, if your Internet account uses a dynamically assigned IP address, you do not know in advance what your IP address will be, and the address can change frequently. In this case, you can use a commercial Dynamic DNS service, which allows you to register your domain to their IP address, and forwards traffic directed at your domain to your frequently changing IP address. Note: If your ISP assigns a private WAN IP address (such as 192. 168. x. x or 10. x. x. x), the Dynamic DNS service will not work because private addresses are not routed on the Internet. Your router contains a client that can connect to the Dynamic DNS service provided by DynDNS. org. You must first visit their website at www. dyndns. org and obtain an account and host name, which you configure in the router. Then, whenever your ISP-assigned IP address changes, Customizing Your Network Settings v1. 0, August 2010 5-5 N600 Wireless Dual Band Router WNDR3400 User Manual your router automatically contacts the Dynamic DNS service provider, logs in to your account, and registers your new IP address. If your host name is hostname, for example, you can reach your router at hostname. dyndns. org. From the main menu, under Advanced, select Dynamic DNS to display the Dynamic DNS screen. Figure 5-2 To configure Dynamic DNS: 1. Register for an account with one of the Dynamic DNS service providers whose names appear in the Service Provider list. Type the host name (or domain name) that your Dynamic DNS service provider gave you. This is the name that you use to log in to your account, not your host name. If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can select the Use Wildcards check box to activate this feature. For example, the wildcard feature causes *. yourhost. dyndns. org to be aliased to the same IP address as yourhost. dyndns. org. Click Apply to save your configuration. Customizing Your Network Settings v1. 0, August 2010 5-6 N600 Wireless Dual Band Router WNDR3400 User Manual Configuring the WAN Setup Options The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the Maximum Transmit Unit (MTU) size, and enable the wireless router to respond to a ping on the WAN (Internet) port. From the main menu, under Advanced, click WAN Setup to view the WAN Setup screen. Figure 5-3 The WAN Setup fields are described in the following table: Table 5-2. [. . . ] You can erase the current configuration and restore factory defaults in two ways: · · Use the Erase function of the router (see "Erasing the Configuration" on page 4-12). Use this method for cases when the administration password or IP address is not known. To restore the factory default configuration settings when you do not know the administration password or IP address, you must use the restore settings button on the bottom of the router. Press and hold the restore settings button for over 5 seconds until the Power light turns to blinking amber. Release the restore settings button, and wait for the router to reboot. [. . . ]