User manual NETGEAR WNDAP350

[. . . ] Technical Support Please refer to the Resource CD that shipped with your product. If your product does not contain a Resource CD, then refer to the support information card that shipped with your product. Com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. For other countries, see the Warranty and Customer Support information on your Resource CD. [. . . ] To configure WPA and WPA2 with RADIUS, see “Configuring WPA and WPA2 with RADIUS” on page 2-38. If enabled, the associated wireless clients will not be able to communicate with each other. 1Q) standard and this feature has been enabled, the default VLAN ID for WNDAP350 will be associated with each profile. The default Profile VLAN ID must match the IDs used by other network devices. Your new settings will appear in the Security Profiles table identified by the Profile Name of the profile. Note: Security Profiles that share the same type of network authentication need not share the same passphrase or keys. From the Network Authentication drop-down menu, choose either Open System or Shared Key authentication. From the Data Encryption drop-down menu, select encryption strength (64 bits, 128 bits, or 152 bits). These values must be identical on all PCs and wireless access points in your network. Choose either: • • Automatic – Enter a word or group of printable characters in the Passphrase box and click the Generate button. Manual – Enter the number of hexadecimal digits appropriate to the encryption strength: 10 digits for 64-bit, 26 digits for 128-bit and 32 digits for 152-bit (any combination of 0-9, a-f, or A-F) Select which of the four keys will be the default. Select the key to be used as the default key by checking the radio box. ) See the document “Wireless Communications” for a full explanation of each of these options, as defined by the IEEE 802. A link to this document on the NETGEAR website is in Appendix B, “Related Documents. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired computer to make any further changes. Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings. Under the Configuration tab, select Security on the main menu, select Advanced from the left-hand menu, and then select RADIUS Server Settings. [. . . ] 1, November 2009 Command Line Reference ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual | | | | |-dtim-interval --wireless DTIM period in beacon interval | | | | |-extension-protection-spacing --wireless extension protection spacing | | | | |-fragmentation-length --wireless fragmentation threshold(even only) | | | | |-guardinterval --interval (from interference from other transmissions) | | | | |-knownap-add --add known access point | | | | |-knownap-del --delete known access point | | | | |-macacl> --modify wireless access control (ACL) | | | | | |-add --add wireless access control (ACL) | | | | | |-del --delete wireless access control (ACL) | | | | | | | | | |-macacl-add --add wireless access control (ACL) | | | | |-macacl-database --delete wireless access control (ACL) database | | | | |-macacl-del --delete wireless access control (ACL) | | | | |-mcsrate --transmit data rate | | | | |-mode --enable wireless access control (ACL) | | | | |-operation-mode --wireless operation mode | | | | |-power --wireless transmit power | | | | |-radio --enable wireless radio | | | | |-rate --wireless transmission date rate | | | | |-rifs-transmission --enable successive frame transmission at different transmit powers | | | | |-rogue-ap-detection --enable rogue access point detection | | | | |-rts-threshold --wireless RTS/CTS threshold | | | | |-security-profile> --create security profile | | | | | |-1> --1st security profile | | | | | | |-authentication --authentication type | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-2> --2nd security profile | | | | | | |-authentication --authentication type Command Line Reference v1. 1, November 2009 C-7 ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-3> --3rd security profile | | | | | | |-authentication --authentication type | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-4> --4th security profile | | | | | | |-authentication --authentication type | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key C-8 v1. 1, November 2009 Command Line Reference ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-5> --5th security profile | | | | | | |-authentication --authentication type | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-6> --6th security profile | | | | | | |-authentication --authentication type | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-7> --7th security profile | | | | | | |-authentication --authentication type Command Line Reference v1. 1, November 2009 C-9 ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-8> --8th security profile | | | | | | |-authentication --authentication type | | | | | | |-encryption --data encryption | | | | | | |-hide-network-name --hide network name | | | | | | |-key1 --wireless wep key 1 | | | | | | |-key2 --wireless wep key 2 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | | | | | |-wireless-bridge> --wireless bridge setting | | | | | |-security-profile> --create security profile | | | | | | |-1> --1st security profile | | | | | | | |-authentication --authentication type | | | | | | | |-encryption --data encryption | | | | | | | |-name --profile name | | | | | | | |-presharedkey --preshared key | | | | | | | |-remote-mac --remote MAC | | | | | | | |-status --profile status | | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | | |-wepkey --wireless wep key C-10 v1. [. . . ]