User manual NETGEAR WN604

[. . . ] All rights reserved No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. To register your product, get the latest product updates, get support online, or for more information about the topics covered in this manual, visit the Support website at http://support. Com Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): Check the list of phone numbers at http://support. Com/app/answers/detail/a_id/984 Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. [. . . ] € The PIN method requires you to enter the wireless client’s PIN, which should be displayed on the client’s utility interface. A progress bar on the Connecting to New Wireless Client screen shows the status of the wireless connection. If the settings have not changed, you can click the Success message to return to the Add WPS Client screen. In case of an error in completing the WPS process, refer to the online help. Restrict Wireless Access by MAC Address Access control lets you block the network access privilege of any specified stations through the access point. When you enable access control, the access point accepts only connections from clients on the selected access control list. Configure Security 32 Wireless N150 Access Point WN604 Note: If you connected wirelessly to set up MAC authentication, make sure to include the MAC address of the computer you are using in the access control list. If this happens and you want to make more changes, log in to the access point with a wired connection, or wirelessly from a computer that is on the access control list. Select the Turn Access Control On check box to enable access control feature. In the Select the desired Access Control Database list, Local MAC Address Database is selected. The Trusted Wireless Stations list shows any wireless stations you have entered. Click Refresh to refresh the available wireless stations found in your area. Select the stations from the list of Available Wireless Stations found in your area, or enter the MAC address of a station to add a new station manually. (You can usually find the MAC address printed on the bottom of the wireless adapter. Click Add to add the wireless device to the Trusted Wireless Stations list. Repeat these steps for each additional device you want to add to the list. Now, only devices on this list are allowed to wirelessly connect to the access point. Management 4 This chapter describes how to use the management features of your access point, which you access from the Maintenance and Monitoring tabs. This chapter contains the following sections: • • • • • • • • Upgrade the Wireless Access Point Firmware Configuration File Management Change the Administrator Password Enable the SysLog Server Activity Log View Summary Information Network Traffic Statistics Available Wireless Station Statistics 34 Wireless N150 Access Point WN604 Upgrade the Wireless Access Point Firmware The software of the access point is stored in flash memory, and can be upgraded as new software is released by NETGEAR. You can use youre browser to download upgrade files from the NETGEAR website and to send the upgrade file to the access point. When uploading firmware to the access point, do not interrupt the web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, the upload might fail, corrupt the software, and render the access point completely inoperable. [. . . ] FCC Guidelines for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. , 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the Wireless N150 Access Point WN604 complies with Part 15 Subpart B of FCC CFR47 Rules. [. . . ]