User manual NETGEAR WN3000RP

[. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. To register your product, get the latest product updates, get support online, or for more information about the topics covered in this manual, visit the Support website at http://support. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): Check the list of phone numbers at http://support. Com/app/answers/detail/a_id/984 Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. [. . . ] The IP Address screen shows whether the Extender is set to get its IP address dynamically from the router (this is the most common setting), or is set as a static IP address. The wireless network router assigns an IP address when the Extender connects to its wireless network. If you set this up, you should be technically experienced or have a technically experienced person help you. You can also select Status from the menu to display this screen: This screen shows the current settings and the status of your Extender. You can click Show Statistics to see device performance statistics such as the number of packets sent and number of packets received for each port. Your Extender is set up to connect to this SSID, also called the wireless name. The actual transmission (Tx) and receive (Rx) link rate in the current wireless connection. extender Network Settings 19 Universal WiFi Range Extender WN3000RP Extender IP Info • • • • • • MAC Address. The physical address of the Extender, as seen from the local area network (LAN). The IP subnet mask associated with the LAN IP address of the Extender. The IP address of the Domain Name Server (DNS) of the wireless network. extender Wireless Settings • • • • • • Name (SSID). Show Statistics On the Device Status screen, click Show Statistics to display the following screen: Table 1. show Statistics Fields Field LAN or WLAN (Port) Status TxPkts RxPkts Description The statistics for the LAN (local) , and wireless LAN (WLAN) ports. For each port, the screen displays the following: The link status of the port. The number of packets transmitted on this port since reset or manual clear. The number of packets received on this port since reset or manual clear. extender Network Settings 20 Universal WiFi Range Extender WN3000RP Table 1. Show Statistics Fields (Continued) Field Collisions Tx B/s Rx B/s Up Time Poll Interval Description The number of collisions on this port since reset or manual clear. The current line utilization—percentage of current bandwidth used on this port. If you change this value, click Set Interval so that your change takes effect. Net, under the Maintenance heading, select Network Devices to display the following screen: Back Up and Manage Extender Settings From the Extender menu at http://www. [. . . ] This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. , 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the Universal WiFi Range Extender WN3000RP complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]