User manual NETGEAR WG311V3

[. . . ] Tip: As an alternative to typing in the SSID, you can use the drop-down list or the Networks tab to view the available wireless networks, and choose the one you want. You can also enter a profile name and click Save Profile to store the current settings. Insert the WG311V3 Wireless PCI Adapter into an available PCI slot. [. . . ] Connect the antenna to the adapter and position the antenna to the up position. Note: If a Windows XP logo testing warning appears, click Continue Anyway to proceed. When prompted to enable the NETGEAR Smart Wireless Settings Utility, click Yes to accept this option. Installation Guide Follow these quick steps to install your WG311V3 PCI Adapter. The basic installation and configuration instructions below assume that your wireless network connection will be to an access point, and you are not using WEP security. Please refer to the Reference Manual on the 108 Mbps Wireless PCI Adapter Resource CD for detailed instructions on configuring WEP, using Ad-Hoc mode, or using advanced options. Note: The status bar at the bottom of the utility reports the speed of your connection. 108 Mbps speed is only possible when your wireless network has a 108 Mbps access point such as in the NETGEAR WGT624 108 Mbps Wireless Firewall Router. 4 Finally, verify wireless network connectivity Note: When the Windows XP wireless configuration utility is enabled, only the first two tab pages of the Netgear Smart Wireless Settings utility will appear. If you choose No, you must read the Windows XP documentation for an explanation of how to use the Windows XP wireless network configuration utility. To see the full NETGEAR utility, please refer to the Reference Manual on the 108 Mbps Wireless PCI Adapter Resource CD. 108 Mbps speed is only possible when your wireless network has a 108 Mbps access point such as in the NETGEAR WGT624 108 Mbps Wireless Firewall Router. the PCI Adapter 2 Next, installthe PCWG311V3 Wirelesscord. Shut down and remove its power WG311V3 Wireless PCI Adapter into an available PCI slot. Note: If a Windows 2000 displays a Digital Signature Not Found warning, click Yes to continue the installation. When the installation is complete, you will see the WG311V3 system tray icon on the lower right portion of the Windows task bar. 4 Finally, verify wireless network connectivity Note: You can also use the Networks tab to verify the availability of wireless networks and their SSIDs. Please see the Reference Manual on the 108 Mbps Wireless PCI Adapter Resource CD. Verify that your connection information matches your wireless network. Note: If you are unable to connect, see troubleshooting tips in the Basic Installation section of the Reference Manual on the 108 Mbps Wireless PCI Adapter Resource CD. 0560 ! Attention: This device may be used throughout the European community. [. . . ] Note: If you are unable to connect, see troubleshooting tips in the Basic Installation section of the Reference Manual on the 108 Mbps Wireless PCI Adapter Resource CD. 0560 ! Attention: This device may be used throughout the European community. Some restrictions may apply in France and Italy. *201-10066-02* 201-10066-02 December 2003 ©2003 NETGEAR, Inc. [. . . ]