User manual NETGEAR SSL312

[. . . ] NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, California 95134 USA 202-10208-05 November 2008 v2. 1 © 2008 by NETGEAR, Inc. All rights reserved. Technical Support Please register to obtain technical support. To register your product, get product support or obtain product information and product documentation, go to http://www. NETGEAR. com. [. . . ] The Users and Groups menu displays. 4-14 Setting Up User and Group Access Policies v2. 1, November 2008 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual Figure 4-10 Adding a New User To create a new user: 1. This is the name the user will enter in order to log into the SSL VPN portal. From the Group pull-down menu, select the name of the group to which the user belongs. Setting Up User and Group Access Policies v2. 1, November 2008 4-15 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual 4. If the selected group is in a domain that uses external authentication, such as Kerberos, RADIUS, NT Domain, or LDAP, then the Add User menu will close and the new user will be added to the Users and Groups table. Note: Groups configured to use Radius, LDAP, NT Domain, or Kerberos authentication do not require passwords because the external authentication server will validate user names and passwords. It is only necessary to enter RADIUS, LDAP, NT and Kerberos user names if you wish to define specific policies or bookmarks per user. If users are not defined in the SSL VPN Concentrator, then global policies and bookmarks will apply to users authenticating to an external authentication server. If the selected group is in a domain that uses internal database authentication, such as the default "geardomain" domain, then the following window displays: Figure 4-12 5. In the Confirm Password field, re-enter the password. Note: Both the user name and password are case-sensitive. 7. From the User Type pull-down menu, select the user type (either User or Administrator). Once the user has been added, the new user appears in the table in the Users and Groups menu. 4-16 Setting Up User and Group Access Policies v2. 1, November 2008 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual Figure 4-13 Editing a User To edit a user: 1. In the Users table in the Users and Groups menu, click the name of the user. · The Edit User Settings section shows the User Name, Group Name, and Domain Name. To modify information supplied in these fields, remove the user by clicking Delete User and then recreate the user with the correct information. If the user authenticates to an external authentication server, then the User Type and Password fields are not shown. The password fields are not configurable because the authentication server will validate the password. The user type is not configurable because the SSL VPN Concentrator only allows users who authenticate to the internal user database to have administrative privileges. · Setting Up User and Group Access Policies v2. 1, November 2008 4-17 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual . Figure 4-14 2. To modify the user password, enter the new user password in the Password field. From the Terminal Services SSO pull-down menu, select Use Group, Enable, or Disable. When Terminal Services Single Sign-On (SSO) is enabled, a user with a domain account will log in only once, and can then access remote servers without being asked again for his credentials. If different settings are configured at different levels, the user level option will take precedence over the group level option and the group level option will take precedence over the global level option. To force the group to use the group level option, select Use Group. 4-18 Setting Up User and Group Access Policies v2. 1, November 2008 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual 5. [. . . ] If the mail server requires authentication, enter the user name and password in the Mail User Name and Mail Password fields. Configure how frequently log files will be e-mailed and cleared in the Send Event Logs field. If When Full is selected, the event log will be e-mailed and then cleared when the log file is full. If Daily or Weekly options are selected, then: · · If "Daily" is selected, the log file will be e-mailed at the configured time between 00 hours and 23 hours selected from the Time pull-down menu. [. . . ]