User manual NETGEAR PTV2000

[. . . ] Push2TV HD Adapter (PTV2000) for Intel Wireless Display User Manual 350 East Plumeria Drive San Jose, CA 95134 USA January 2011 202-10769-01 v1. 0 Push2TV HD TV Adapter for Intel® Wireless Display User Manual ©2011 NETGEAR, Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support. netgear. com. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): See Support information card. Trademarks NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are trademarks or registered trademarks of NETGEAR, Inc. [. . . ] If the WiDiApp. exe CPU number is 80 or above, save documents, and close unused applications. If it is not, try moving the adapter to a different position that is farther away from other electronic equipment, or closer to the laptop. If this does not help, try disconnecting the adapter and connecting again. (If you are not using a router, see the next solution. ) If you are not connected to a router, change the wireless channel. Open Intel My WiFi Utility by clicking the Intel My WiFi Technology icon in the taskbar and selecting Open Intel My WiFi Utility. Use the help document in the Intel My WiFi Utility and search for Access Points. In the results, click Advanced Settings and follow the instructions. · · · Chapter 3. Troubleshooting | 17 Push2TV HD TV Adapter for Intel® Wireless Display User Manual Your Video Mode Has Changed The video display resolution might change while you are using Intel Wireless Display. This can happen regardless of whether you change the display resolution manually or it is changed by another application. On the Your Video Mode has Changed screen, click the Restore settings and resume connection button to allow the application to automatically reset the display to the correct settings. Selecting Keep settings and close connection results in the display session ending. Intel Wireless Display supports at least one or more of the following resolutions: 1280 x720, 1280 x768, 1280 x 800, 1366 x 768, 1440 x 900, 1600 x 900, and 1920 x 1080. For information about viewing in HDTV 1080p resolution, see HDTV 1080p Resolution on page 14. Returning the Adapter to Its Original Firmware and Factory Settings This procedure erases the security code for your adapter. After you do this, you will have to set the adapter up again to work with your TV and your laptop as described in the installation guide. This procedure also removes any firmware updates that you have installed. To return the adapter to its original firmware level and its default settings: 1. While you continue to hold the Restore Factory Settings button, press the On/Off button to turn the adapter back on. Wait until the LED on the front flashes, then release the Restore Factory Settings button. The adapter returns to its original firmware level and its default settings. 18 | Chapter 3. Troubleshooting Push2TV HD TV Adapter for Intel® Wireless Display User Manual Initial Setup Adapter Power Does Not Turn On The On/Off button is located on the rear of the adapter. On/Off Figure 1. On/Off button If the adapter is not turning on, make sure the power cord is pushed all the way into both the wall outlet and the adapter. If power is not getting to the adapter, there might be a faulty power cord. Changing the TV Input Different TV brands have various methods of changing the TV input. [. . . ] tímto prohlasuje, ze tento Radiolan je ve shode se základními pozadavky a dalsími príslusnými ustanoveními smernice 1999/5/ES. erklærer herved, at følgende udstyr Radiolan overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Hiermit erklärt NETGEAR Inc. , dass sich das Gerät Radiolan in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. seadme Radiolan vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Dansk [Danish] Deutsch [German] Eesti [Estonian] 28 | Appendix C. [. . . ]