User manual NETGEAR PTV1000

[. . . ] Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 202-10591-01 January 2010 © 2010 by NETGEAR, Inc. All rights reserved. . Technical Support Please refer to the support information card that shipped with your product. By registering your product at http://www. netgear. com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. [. . . ] If this does not resolve the issue, see "Adapter Does Not Work" on page 2-6. There are No Adapters Detected It may be necessary to scan multiple times. If rescanning does not solve the issue, make sure the adapter is on and the TV is displaying the To get started screen. Also, try moving the laptop or the adapter to different places in the room. If this does not work, see "Common Solutions to Many Issues" on page 2-7. Security Code Issues The phrase, That security code is not correct. . . in the Security Code section, means the wrong security code has been entered. If the connection fails right after a correct security code is entered, it is necessary to connect again and retype the security code. TV Image is Rough, Frozen or Delayed To fix a rough, frozen, or delayed image try each of the following steps individually. If the WiDiApp. exe CPU number is 80 or above, save documents, and close unused applications. If not, try moving the adapter to a different position that is farther away from other electronic equipment, or closer to the laptop. If this does not help, try disconnecting the adapter and connecting again. (If you are not using a router, see the next solution. ) · · -3 v1. 0, January 2010 Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual · If you are not connected to a router change the wireless channel. Open Intel My WiFi Utility by clicking on the Intel My WiFi Technology icon in the taskbar and selecting Open Intel My WiFi Utility. Use the help document in Intel My WiFi Utility and search for Access Points. In the results, click Advanced Settings and follow the instructions. Your Video Mode has Changed. . . The video display resolution may change while using Intel Wireless Display. This can happen regardless of whether you change the display resolution manually or it is changed by another application. screen, click the Restore settings and resume connection button to allow the application to automatically reset the display to the correct settings. Choosing Keep settings and close connection results in the display session ending. The supported video display settings are: Screen resolution (in landscape or portrait mode) = 1280 x 720, 1280 x 768, or 1280 x 800. Intel Wireless Display does not support extended or remote display modes. Unsupported Audio Mode The laptop must have specific audio settings for Intel Wireless Display to work correctly. Adjusting these settings to a unsupported audio mode is not recommended. The Unsupported audio mode screen appears if the audio display settings need adjusting. In the Unsupported audio mode window click the Adjust audio settings button. On the Advanced tab choose either 16 bit, 44100 Hz (CD Quality) or 48000 Hz (DVD Quality) and click OK. [. . . ] Training Three Displays While using a laptop, a TV, and an external monitor sometimes the laptop's display settings may be inadvertently changed. The laptop is capable of only displaying on two screens at the same time including its own. The TV screen needs to be one of the two selected screens. -12 v1. 0, January 2010 Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual To select which screens to use: 1. Simultaneously push the Windows button and the letter P on the keyboard. [. . . ]