User manual NETGEAR NIGHTHAWK X4S R7800

[. . . ] 3 Join the WiFi Network Using the Router’s WiFi Settings Use the router’s WiFi network name and password to connect your computer or WiFi device to the router’s network through WiFi. If you did not change the router’s WiFi network name and password, use the router’s preassigned WiFi network name and password, which are on the label on the router. ¾¾ To select your network and enter its password: 1. On your computer or other WiFi device, open the WiFi connection manager that manages your WiFi connections. [. . . ] To be able to recover the password, select the Enable Password Recovery check box. 7 Recover a Forgotten admin Password The default password for the admin user name is password. If you changed the password and enabled the password recovery feature, you can retrieve this password. â¾Â¾ To retrieve a forgotten admin password: 1. Launch a web browser from a computer or WiFi device that is connected to the network and visit www. If password recovery is enabled, you are prompted to enter the serial number of the router. 8 Access a USB Device on the Network ReadySHARE lets you access and share a USB storage device connected to the router’s USB ports. ) ¾¾ To access the USB storage device from a Windows computer: 1. It might take up to two minutes before the USB storage device is ready for sharing. On a Windows computer that is connected to the network, select Start > Run, enter \\readyshare in the dialog box, and click the OK button. 9 ¾¾ To access the USB storage device from a Mac: 1. It might take up to two minutes before the USB storage device is ready for sharing. On a Mac that is connected to the network, launch Finder and select Go > Connect to Server. Enter the smb://readyshare in the Server Address field and click the Connect button. If you set up access control on the router and you allowed your Mac to access the network, select the Registered User radio button and enter admin for the name and password for the password. For more information about access control, see the user manual, which is available online at downloadcenter. 10 Back Up With ReadySHARE Vault Your router comes with free backup software for all the Windows computers in your home. Connect a USB hard disk drive (HDD) to the USB port on your router for centralized, continuous, and automatic backup. Note:  The following operating systems support ReadySHARE Vault: Windows XP SP3, Windows 7, Windows 8, Windows 8. 1, and Windows 10 ¾¾ To back up your Windows computer: 1. Use the dashboard or the Backup tab to set up and run your backup jobs. 11 Print Wirelessly With ReadySHARE Printer ReadySHARE Printer lets you connect a USB printer to a USB port on the router and print wirelessly. [. . . ] After you set up VPN service, you can use VPN to access the router’s USB drive and media and to access your Internet service at home. These steps are explained in detail in the user manual, which is available online at downloadcenter. 14 Personal FTP Server With your customized free URL, you can use FTP to access your network when you aren’t home through Dynamic DNS. Connect a USB hard disk to your router and set up FTP access through the Internet. [. . . ]