User manual NETGEAR GSM7352SV1

[. . . ] ProSafe® Managed Switch Web Management User Manual 350 East Plumeria Drive San Jose, CA 95134 USA October 27, 2010 202-10757-01 v1. 0 ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual ©2010 NETGEAR, Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support. netgear. com. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): See Support information card. Trademarks NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are trademarks or registered trademarks of NETGEAR, Inc. [. . . ] A 32-bit integer in dotted decimal format representing the Router ID of the neighbor on the selected Interface. A 32-bit integer in dotted decimal format representing the area common to the neighbor selected. The priority of this neighbor in the designated router election algorithm. A value of 0 signifies that the neighbor is not eligible to become the designated router on this particular network. Number of seconds since last Hello was received from Adjacent Neighbors. The number of times this neighbor relationship has changed state, or an error has occurred. Length of the selected neighbor's retransmit queue. Router ID Area ID Options Router Priority State Dead Time Events Retransmission Queue Length 1. Click REFRESH to refresh the page with the latest OSPFv3 neighbor information for the selected interface. Routing | 317 ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Link State Database Use the OSPFv3 Link State Database page to display the link state database. To display the Link State Database page, click Routing OSPFv3 Advanced Link State Database. Table 44. Field Router ID Description The 32 bit integer in dotted decimal format that uniquely identifies the router within the autonomous system (AS). After you set the new Router ID, you must re-enable OSPFv3 to have the change take effect. The ID of an OSPFv3 area to which one of the router interfaces is connected. An Area ID is a 32 bit integer in dotted decimal format that uniquely identifies the area to which an interface is connected. Area ID 318 | Chapter 4. Routing ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Table 44. Field LSA Type Description The format and function of the link state advertisement. One of the following: · Router LSA: A router may originate one or more router-lsas for a given area. Each router-lsa originated in an area describes the collected states of all the router's interfaces to the area. · Network LSA: A network lsa is originated for every link having two or more attached routers, by the designated router. · Inter-Area Router LSA: This type describes a prefix external to the area, yet internal to the autonomous system. · AS-External LSA: This LSA type describes a path to a prefix external to the autonomous system and is originated by an Autonomous System Border Router. · Link LSA: A router originates a separate Link-lsa for each attached link. It provides router's link local address to routers attached to the link and also inform them of a list of IPv6 prefixes to associate with the link. · Intra-Area-Prefix LSA: A link's designated router originates one or more intra-areaprefix lsas to advertise the link's prefixes throughout the area. [. . . ] Switches 1 and 2 also have hosts in the Sales and Human Resources departments. The hosts connected from Switch 2 use VLAN 500, MST instance 2 to communicate with the hosts on Switch 3 directly. Likewise, hosts of Switch 1 use VLAN 300, MST instance 1 to communicate with the hosts on Switch 3 directly. The hosts use different instances of MSTP to effectively use the links across the switch. [. . . ]