User manual NETGEAR FS305

[. . . ] Fm Page 1 Tuesday, August 7, 2012 10:05 AM Installation Guide Ethernet Switch FS305/FS308 Estimated installation time: 5-10 minutes Prepare to Install the Switch Place the switch on a flat horizontal surface such as a table, desk, or shelf. [. . . ] Note: If any LED does not operate as indicated, go to the Troubleshooting section. For 100M port • • If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure that the card or adapter is installed correctly and is working. network interface Power Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product. For product updates, additional documentation, and support go to: http://support. For complete DoC, go to the NETGEAR EU Declarations of Conformity website at: Network latency (using 64- 100 Mbps:12 μs byte packets) 10 Mbps: 85 μs Address database size Queue buffer FS305: 2K MAC addresses FS308: 1K MAC addresses FS305: 384 KB embedded FS308: 768 KB embedded Power consumption (max. €¢ • • Make sure that the power cord is correctly connected. Make sure that the power adapter is connected to a functioning power outlet or power strip. [. . . ] Other brand and product names are registered trademarks or trademarks of their respective holders. [. . . ]