User manual NETGEAR FS208

[. . . ] Fm Page 1 Tuesday, August 7, 2012 9:57 AM Installation Guide Ethernet Switch FS205/FS208 Estimated installation time: 5-10 minutes Prepare to Install the Switch Place the switch on a flat horizontal surface such as a table, desk, or shelf. [. . . ] For 100M port • • If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure that the card or adapter is installed correctly and is working. network interface Power Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product. For product updates, additional documentation, and support go to: http://support. For complete DoC, go to the NETGEAR EU Declarations of Conformity website at: Network latency (using 64- 100 Mbps:12 μs byte packets) 10 Mbps: 85 μs Address database size Queue buffer FS205: 2K MAC addresses FS208: 1K MAC addresses FS205: 384 KB embedded FS208: 768 KB embedded Power consumption (max. €¢ • • Make sure that the power cord is correctly connected. Make sure that the power adapter is connected to a functioning power outlet or power strip. Make sure you that are using the NETGEAR power adapter supplied with your switch. [. . . ] Other brand and product names are registered trademarks or trademarks of their respective holders. [. . . ]