User manual NETGEAR FA410TX INSTALLATION GUIDE

[. . . ] MODEL F 410TX A Network Card Installation Guide Start Here Instructions in this guide are for users of Windows® 95 who are installing the Model FA410TX Network Card. For instructions on installing and verifying the Windows 95 network driver, refer to "Install the Windows 95 Network Driver" on the other side of this guide. These three easy steps provide information for installing your Model FA410TX Network Card: 1. [. . . ] Before you proceed with the installation steps, decide on a name for your network and for each PC (each name must be only one word). You also need to have the Windows 95 CD-ROM and the FA410TX Drivers and Diagnostics Disk ready to use in the installation process. Note: If the "Insert Disk" window opens and the "Please insert the disk labeled Windows 95. . . " message appears at any time during the installation process, insert the Windows 95 CD-ROM in Drive D (the CD-ROM drive) and click on "OK. " Then follow the next step in the instructions. If you do not have a CD-ROM drive and are using the Windows 95 floppy disks, insert the requested Windows 95 floppy disk in Drive A, click on "OK, " and then follow the next step in the instructions. Model FA410TX Network Card Installation Giude 1. Turn on power to the computer and start Windows 95. The new hardware is found, and the driver is automatically loaded. Select "Driver from disk provided by hardware manufacturer, " and then click on "OK. " 2. Make sure Drive A is designated on the prompt line (for example, A:\) when the "Copy manufacturer's files from. . . . " message is displayed. Click on "OK. " 3. Network i You must provide computer and workgroup names that will identify this computer on the network. OK Click on "OK. " Model FA410TX Network Card Installation Giude 4. Enter a name (different for each computer) in the "Computer name" entry field, enter a workgroup name (the name of your entire network) in the "Workgroup" entry field, and click on "OK" or "Close. " (If you have previously named your computer and network, the options on the window may vary slightly and could be either "OK" or "Close. ") Model FA410TX Network Card Installation Giude 5. Insert the Windows 95 CD-ROM and click on "OK. " 6. Make sure Drive D and win95 are designated on the "Copy files from" prompt line (example, D:\win95), and then click on "OK. " 7. 8. Remove the Drivers and Diagnostics Disk from the floppy drive, remove the Windows 95 CD-ROM from the CD drive, and then click on "Yes. " Proceed to "Verify Installation. " Model FA410TX Network Card Installation Giude Verify Installation 1. Double-click on "My Computer" on the desktop, double-click on "Control Panel, " and then double-click on "System. " Model FA410TX Network Card Installation Giude 2. Click on "Device Manager. " Model FA410TX Network Card Installation Giude 3. Double-click on "Network adapters, " and then double-click on "NETGEAR FA410TX Fast Ethernet. . . . " Model FA410TX Network Card Installation Giude 4. Double-click on "NETGEAR FA410TX Fast Ethernet PC Card" to display a message regarding the status of the device. If there is a problem with the installation of the driver, an exclamation point appears next to "NETGEAR FA410TX Fast Ethernet PC Card. " Continue to click on "OK" or click on the "X" in the right hand corner to close any open windows and return to the Windows 95 desktop. Restart your PC by selecting "Shut- Down" from the Windows 95 startup menu and then selecting "Restart the computer. " Model FA410TX Network Card Installation Giude © 2000 by NETGEAR, Inc. All rights reserved. Trademarks NETGEARTM is a trademark of NETGEAR, INC. Other brand and product names are trademarks or registered trademarks of their respective holders. All rights reserved. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Certificate of the Manufacturer/Importer It is hereby certified that the Model FA410TX Network Card has been suppressed in accordance with the conditions set out in the BMPTAmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. [. . . ] Conformity is declared by the application of EN 55 022 Class B (CISPR 22). Compliance is dependent upon the use of shielded data cables. Canadian Department of Communications Radio Interference Regulations This digital apparatus (Model FA410TX Network Card) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Règlement sur le brouillage radioélectrique du ministère des Communications Cet appareil numérique (Model FA410TX Network Card) respecte les limites de bruits radioélectriques visant les appareils numériques de classe B prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du Canada. Model FA410TX Network Card Installation Giude NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR http://www. NETGEAR. com Customer Support Phone U. S. /Canada: 888-NETGEAR United Kingdom: 020-7216-0014 France: 0800-77-17-53 Germany: 00800-06384327 Australia: 800-787-638 New Zealand: 00800-1233-4566 Korea: 00308-11-0319 Sweden: 0200-298-298 Internet/World Wide Web The NETGEAR web page is at http://www. NETGEAR. com. *M-FA410TXNA-1* * M F A 4 1 0 T X N A 1 * [. . . ]