User manual NETGEAR FA331 INSTALLATION GUIDE

[. . . ] "NETGEAR FA330/FA331 PCI Adapter" will appear in the model list. Click "Driver" and click "Update Driver" tab, then click "OK". 4. Enjoy being connected! Category 5 10/100 Mbps UTP cables* RJ-45 Connector RJ-45 Connector As a last step, be sure to register your Adapter at http://www. NETGEAR. com. ® Plan Your Time Estimated setup time for this product is only *Use the cables provided or any Category 5 UTP cable. The next Windows appears with the following adapter name : NETGEAR FA330/FA331 PCI Adapter. [. . . ] After installing the FA311 (or FA312) PCI Adapter, the Win XP will install the driver automatically. Following the steps to check if the driver is well installed. · GearBox for Adapters CD · FA311/FA312/FA331 Installation Guide For FA331 Adapters: 2 CONNECT NETGEAR TO YOUR ENVIRONMENT Install the Card Note: Touch a grounded metal object to free yourself of static electricity before you handle the card. Choose an available PCI slot and remove the corresponding back plate from the PC chassis. Caution: To avoid damaging any components on the card, handle it by the edges, using your thumbs to push it securely into the PCI slot. Make sure the card is fully inserted into the slot to prevent the PC operating system from freezing at startup. Network card 1. Double-click "My Computer" on the desktop, double-click "Control panel" and then double-click "System". Click "Hardware" and click "Device Manager" tab, then double-click "Network adapters". When Select Network Adapter box opens, click "Have Disk" then click "Next". Back plate removed 3. Select "Search for a suitable driver for your device (Recommended)". When the following dialog box opens, select "Specify the location of the driver (Advanced)". Click "Next". 4 TEST YOUR NETWORK CONNECTION To verify your installation (this example uses Windows XP, but the process is similar for the other Windows OS): 1. Double-click "My Computer" on the desktop, click "Control Panel", and then double-click "System". © 2002 by NETGEAR, Inc. Microsoft® Windows® and Windows® logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or the other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. 4. Select "CD-ROM drives" (or "Floppy disk drives" for disk). Check "Specify a location" and type "D:\" (or "A:\" for disk) then click "Next". 3. When the following dialog box opens, select "Search for the best driver for your device (Recommended)". Click "Hardware" and click "Device Manager" tab, then double-click "Network adapters". Certificate of the Manufacturer/Importer It is hereby certified that the FA311/FA312/FA331 Network Card have been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations. [. . . ] The next Windows appears with the following adapter name: NETGEAR FA311/FA312 (or FA330/FA331) PCI Adapter. When Windows returns its search results in the following dialog box, click "Next" to start install the FA311/FA312/FA331 adapter driver. If there is a problem with the installation of the driver, an exclamation point will appear next to the "NETGEAR FA311/FA312 Fast Ethernet Adapter (or FA330/FA331 PCI Adapter)". If the problem persists, call 1-888-NETGEAR for technical support. TECHNICAL SPECIFICATIONS Properties: Standards Compatibility FA311/FA312/FA331 Fast Ethernet PCI Adapter: IEEE 802. 3u Fast Ethernet IEEE 802. 3 Ethernet IEEE 802. 3u Auto Negotiation Auto-Sensing PCI Plug and Play 2. 1 or 2. 2 Compatible RJ-45 connector 3 W max. +5 +/- 5% @ 630 mA maximum EN 55 022 Statement This is to certify that the Model FA311/FA312/FA331 Network Card are shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. [. . . ]