User manual NETGEAR FA311V2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NETGEAR FA311V2. We hope that this NETGEAR FA311V2 user guide will be useful to you.
 |
Manual abstract: user guide NETGEAR FA311V2
Detailed instructions for use are in the User's Guide.
[. . . ] Warning: Windows detects the Ethernet adapter, and automatically installs a driver based on its chipset. You must update that driver to work with the NETGEAR NETGEAR FA311 v2 PCI Adapter.
10/100 PCI Network Interface Card Model FA311 v2
d. [. . . ] Next, use the Windows Hardware Update Wizard
The Hardware Update Wizard window opens, as shown to the right. Locate an available PCI slot (check your computer's manual to determine which slots are the PCI slots) and remove the corresponding back plate from the PC chassis.
c.
Caution: Touch a grounded metal object such as the power supply to free yourself of static electricity before you handle the network card. To avoid damaging any components on the NETGEAR FA311 v2 PCI Adapter, handle it by the edges. Fasten the card to the rear of the computer chassis by tightening the screw that is on the PC. Close the case, plug the power cord back in, and restart your computer.
From Device Manager, double-click Network adapters, and then double-click your network adapter card. The network adapter that Windows selected depends on the operating system. In most cases, the following will be displayed: · · Windows XP: RealTek RTL8139 Family PC Fast Ethernet NIC Windows 2000: RealTek RTL8139(A)-based PCI Fast Ethernet Adapter
c.
Follow the wizard prompts to locate the driver on the NETGEAR Resource CD and select it. When the wizard is finished, remove the NETGEAR Resource CD from your computer. Note: If the driver is not installed properly, there is an exclamation point next to the adapter in Device Manager. Reboot the PC and if the exclamation mark is still there, repeat the software driver update process from Step 3. If the problem persists, contact NETGEAR Technical Support.
d.
2. Next, connect the network cables.
Use Ethernet cable to connect a switch or hub to the NETGEAR FA311 v2 PCI Adapter. [. . . ] If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. Other brand and product names are trademarks or registered trademarks of their respective holders.
January 2006 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NETGEAR FA311V2
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NETGEAR FA311V2 will begin.