User manual NETGEAR FA310TX INSTALLATION GUIDE

[. . . ] Connect the Network Cables As a last step, be sure to register your NETGEAR product. Note: If you are using other network operating systems: Insert the Drivers and Diagnostics Disk in Drive A, type the command A:\HELP, press [Enter] to execute the program, press [Enter] again to pass the opening screen, select the name of the operating system, press [Enter], and then follow the instructions on the screen. Model FA310TX Network Card Installation Guide Verify Package Contents Unpack the contents of the package and make sure that you have everything. Model FA310TX Network Card Drivers and Diagnostics Disk Category 5 10/100 Mbps UTP cable (provided with Model FA310TXC Network Card) Installation guide 9014FA Verify PC Requirements The instructions given in this guide are for using the NETGEARTM Model FA310TX Network Card in a PC that has a Microsoft® Windows operating system. You must have a PC with a PCI expansion slot that has bus mastering capability. Model FA310TX Network Card Installation Guide Install the Network Card Note: Touch a grounded metal object to free yourself of static electricity before you handle the network card. Choose an available PCI slot (PCI slots are the shorter slots) and remove the corresponding back plate from the PC chassis. [. . . ] provide computer and workgroup names. . . . " Click on "OK. " The second "Network" window opens and prompts you for the names. Enter a name (a different oneword name for each computer) in the "Computer name" entry field; enter a workgroup name (the name of your entire network) in the "Workgroup" entry field. Click on "OK" or "Close. " Note: If the "Insert Disk" window opens and the "Please insert the disk labeled Windows. . . " message appears at any time during the installation process, insert the Windows CD-ROM in Drive D (the CD-ROM drive) and click on "OK. " Then follow the next step in the instructions. The new hardware is found, and the driver is automatically loaded. Model FA310TX Network Card Installation Guide 2. New Hardware Found PCI Ethernet Controller Select which driver you want to install for your new hardware: Windows default driver Driver from disk provided by hardware manufacturer Do not install a driver (Windows will not prompt you again) Select from a list of alternate dirvers OK Cancel Help Select "Driver from disk provided by hardware manufacturer, " and then click on "OK. " If a different "New Hardware Found" window opens that prompts you to click on "Next, " doing so opens the "Update Device Driver Wizard" window in Step 3. 3. Update Device Driver Wizard This wizard will complete the installation of: PCI Ethernet Controller by searching your local drives, network, and Internet locations for the most current driver. If you have a disk or CD-ROM that came with this device, insert it now. To do this, click Next to continue. < Back Next> Cancel Insert the FA310TX Drivers and Diagnostics Disk in Drive A, and then click on "Next. " Model FA310TX Network Card Installation Guide 4. Update Device Driver Wizard Windows found the following updated driver for this device: NETGEAR FA310TX Fast Ethernet PCI Adapter If you want to use this driver, click Finish. If this is not the correct driver and you want to search for a different driver manually, click Other Locations. Location of Driver Other Locations. . . < Back Finish Cancel Click on "Finish. " 5. Copying Files. . . The file NDIS2DOS\NGRPCI. dos on Windows 95 CD-ROM could not be found. OK Cancel Skip File Details. . . Copy files from: A:\ Type A:\ in the "Copy files from" entry field and click on "OK. " 6. Remove the Drivers and Diagnostics Disk from the floppy drive, remove the Windows 95 CD-ROM from the CD drive (if you have inserted it), and then click on "Yes. " Restarting your system is necessary to enable your PC to finish setting up your new hardware. Proceed to "Verify Installation. " Model FA310TX Network Card Installation Guide Verify Installation 1. Double-click on "My Computer" on the desktop, double-click on "Control Panel, " and then double-click on "System. " 2. Click on "Device Manager. " Model FA310TX Network Card Installation Guide 3. Double-click on "Network adapters. " 4. If there is a problem with the installation of the driver, an exclamation point appears next to "NETGEAR FA310TX Fast Ethernet PCI Adapter. " If there is an exclamation point, double-click on "NETGEAR FA310TX Fast Ethernet PCI Adapter. " The "Properties" window opens, and a message regarding the status of the device is displayed in the window. Continue to click on "OK" or click on the "X" in the right hand corner to close any open windows and return to Windows 95. Model FA310TX Network Card Installation Guide Technical Specifications Model FA310TX Network Card Standards Compatibility IEEE 802. 3u, 100BASE-TX Fast Ethernet IEEE 802. 3i, 10BASE-T Ethernet NetWare tested and approved Microsoft Windows, Windows 95, Windows NT® compatible PCI Plug-and-Play compatible +5V +/- 5% @ 630 mA maximum 5. 125 x 2. 813 in. 13. 02 x 7. 15 cm . 20 lb (90 g) 0° to 40° C 10% to 90% noncondensing CE mark, commercial FCC, Part 15, Class B EN 55 022 (CISPR 22), Class B Canada ICES-003, Class B Interface Options RJ-45 connector for 10BASE-T or 100BASE-T Ethernet interface DC operating voltage Physical Specifications Dimensions Weight Environmental Specifications Operating temperature Operating humidity Agency Compliance Model FA310TX Network Card Installation Guide Hardware Warranty Information Thank you for selecting NETGEAR products. Subject to the provisions described below, this NETGEAR product is protected by a limited lifetime warranty from defects in material and workmanship. Should a product fail to perform as described above within the first year following the original date of purchase, NETGEAR will ship a replacement for the failed product upon return of the defective product. Products that fail after the first year following the original date of purchase will be repaired or replaced with the same or functionally equivalent, product by NETGEAR, at its discretion, free of charge provided you (1) have, within 30 days of the original date of purchase, completed and returned the Owner Registration Cards which accompanied the products when shipped, (2) return the failed product to NETGEAR designated repair facility with shipping charge prepaid, and (3) provide NETGEAR with proof of the original date of purchase. Repaired or replacement products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If NETGEAR, by its sole determination, is unable to repair or replace the defective product, it will refund the depreciated purchase price of the product. This warranty does not apply if, in the judgement of NETGEAR, the product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or maintained in a manner not conforming to product manual instructions, has been modified in any way, or has had any serial number removed or defaced. [. . . ] · Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity NETGEAR Model FA310TX Network Card Tested to comply with FCC Standards FOR HOME OR OFFICE USE EN 55 022 Statement This is to certify that the Model FA310TX Network Card is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22). Canadian Department of Communications Radio Interference Regulations This digital apparatus (Model FA310TX Network Card) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Règlement sur le Communications brouillage radioélectrique du ministère des Cet appareil numérique (Model FA310TX Network Card) respecte les limites de bruits radioélectriques visant les appareils numériques de classe B prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du Canada. Model FA310TX Network Card Installation Guide NETGEAR, Inc. [. . . ]