User manual NETGEAR ELITE EVA9000

[. . . ] The Setup Wizard starts. Start Here This guide explains how to install the Digital Entertainer Elite using the basic setup; wired Ethernet LAN; and video cable and audio cable included in the package, HDMI, or SCART. For wireless setup, custom setup, or component video connections, a User Manual is provided on your NETGEAR Resource CD, or download the latest documentation at http:/ /www. NETGEAR. com/support. Configure your media library to work with the Digital Entertainer Elite. 4. Install the two AA batteries into the remote control that shipped with the product. Setting Up the Digital Entertainer Elite To set up the Digital Entertainer Elite: 1. [. . . ] 4, 631, 603; 4, 819, 098; 4, 907, 093; 5, 315, 448; and 6, 516, 132 Power S-Video CompositeVideo R Audio Out L Digital Entertainer Elite EVA9000 S/PDIF Optical USB Reset 100-240V 50-60Hz, 1. 2A max. U. S. Patent Nos. 4, 631, 603; 4, 819, 098; 4, 907, 093; 5, 315, 448; and 6, 516, 132 Power SCART S-Video Composite Stereo video audio S/PDIF optical (audio) To connect the Digital Entertainer Elite: 1. Connect the Digital Entertainer Elite to your TV set and audio equipment. If you use a digital audio/visual (a/v) receiver, use an S/PDIF coaxial or optical cable to connect it. Connect the Digital Entertainer Elite to the router with an Ethernet cable. Configuring Your Media Library Use the Configuration Wizard to set up your media library to work with the Digital Entertainer Elite. The Configuration Wizard prompts you to select media folders to be shared. The Configuration Wizard is ready to configure your Digital Entertainer Elite and displays this screen: 3. For some firewalls, specific ports must be opened so that the Digital Entertainer Elite can access media files on your computer. Click Next, and follow the onscreen instructions to select your media folders. When you are finished, go to your TV. Installing an Internal Disk Drive (Optional) The EVA9150 comes with a pre-installed hard disk drive, which is ready to use out of the box. To install an optional disk drive on either Digital Entertainer Elite model, carefully follow these instructions. Warning: The installation process formats the hard drive and erases all existing data. For the EVA9150 only, remove the preinstalled hard disk from the tray, remove the four screws that secure it, and put the justremoved hard disk in a safe place. Position the drive with the bottom facing out from the tray, and the connectors facing away. Use the four screws provided with the unit to secure the drive to the tray. With the latch in the open position, slide the disk tray into the Digital Entertainer Elite completely, securing the latch and closing the door. [. . . ] Warning: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. [. . . ]