User manual NETGEAR DGND4000

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. Phone (Other Countries): Check the list of phone numbers at http://support. [. . . ] The IP address used by the Ethernet (LAN) port of the wireless modem router. Identifies whether the wireless modem router’s built-in DHCP server is active for the LAN-attached devices. This address is the unique physical address used by the Internet (WAN) port of the wireless modem router. administration 85 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 IP Address. The IP address used by the Internet (WAN) port of the wireless modem router. This shows if the wireless modem router is using a fixed IP address on the WAN. If the value is DHCP Client, the wireless modem router obtains an IP address dynamically from the ISP. The IP subnet mask used by the Internet (WAN) port of the wireless modem router. Show Statistics Button On the Router Status screen, in the Internet Port pane, click the Show Statistics button. For each port, the screen displays: • • • • • • • • Status. The number of packets transmitted on this port since reset or manual clear. The number of packets received on this port since reset or manual clear. The current transmission (outbound) bandwidth used on the WAN and LAN ports. The current reception (inbound) bandwidth used on the WAN and LAN ports. To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval. administration 86 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 To stop the polling entirely , click Stop. Connection Status Button On the Router Status screen in the Internet Port pane, click the Connection Status button to view connection status information. View connection status information The Release button returns the status of all items to 0. The IP address for the default gateway that the wireless modem router communicates with. The IP address for the Dynamic Host Configuration Protocol server that provides the TCP/IP configuration for all the computers that are connected to the wireless modem router. The IP address of the Domain Name Service server that provides translation of network names to IP addresses. 4 GHz) and Wireless Settings (5 GHz) The following settings are displayed: Name (SSID). [. . . ] Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. FCC Guidelines for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. [. . . ]