User manual NETGEAR DG834GT

[. . . ] Also, if you purchased the DG834GT/GTB in a country where a microfilter is not included, you must acquire one. a. B Gateway Connect to the router by typing http://192. 168. 0. 1 in the address field of your Internet browser. 1 Connect the DG834GT/GTB to the ADSL Line ADSL signals degrade phone sound quality. Microfilters block such problems and are required for each phone or fax. [. . . ] There are two types: one-line microfilters; and two-line microfilters which include a built-in One-Line Microfilter Phone b. Connect the ADSL port (B) of the DG834GT/GTB to the ADSL connector of the two-line filter. Note: Improperly connecting a filter to your DG834GT/GTB blocks ADSL signals and prevents connecting to the Internet. Connect the Ethernet cable (C) from a LAN port of your DG834GT/GTB to the Ethernet adapter in your computer. Note: The unshielded RJ-45 Ethernet cable is supplied for the connection of the NETGEAR product to your PC and is not intended for connection to the telecommunications network. Plug in the router and verify the following: The power light is lit after applying power to the router. Click Next to let the Setup Wizard detect the type of Internet connection your have. Follow the steps in the Setup Wizard to input the Internet configuration parameters from your ISP. A b. Note: If you were unable to connect to the router, please refer to the Troubleshooting Chapter in the Reference Manual on the Resource CD. Technical Support Thank you for selecting NETGEAR products. After completing the installation, register your product at http://www. NETGEAR. com/register. Registration is required before you can use our telephone support services. Go to http://kbserver. netgear. com/products for product updates and Web support. Attention: When you configure the wireless settings of this device please make sure to select the correct country settings. Due to EU-law the country settings must be identical to the country, where the device is operating (important due to non-harmonized frequencies in the EU). 0681 802. 11g Restrictions: European standards dictate maximum radiated transmit power of 100 mW EIRP and frequency range of 2. 400 ~ 2. 4835 GHz. [. . . ] Go to http://kbserver. netgear. com/products for product updates and Web support. Attention: When you configure the wireless settings of this device please make sure to select the correct country settings. Due to EU-law the country settings must be identical to the country, where the device is operating (important due to non-harmonized frequencies in the EU). 0681 802. 11g Restrictions: European standards dictate maximum radiated transmit power of 100 mW EIRP and frequency range of 2. 400 ~ 2. 4835 GHz. [. . . ]