User manual NETGEAR DG834G

[. . . ] 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10006-06 September 2005 © 2005 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. [. . . ] If Client, the ADSL modem router will obtain an IP address dynamically from the ISP. This field displays the IP Subnet Mask being used by the Internet (ADSL) port of the ADSL modem router. This field displays the DNS Server IP addresses being used by the ADSL modem router. These parameters apply to the Local (ADSL) port of the ADSL modem router. This field displays the Ethernet MAC address being used by the Local (LAN) port of the ADSL modem router. This field displays the IP address being used by the Local (LAN) port of the ADSL modem router. If OFF, the ADSL modem router will not assign IP addresses to PCs on the LAN. If ON, the ADSL modem router will assign IP addresses to PCs on the LAN. This field displays the IP Subnet Mask being used by the Local (LAN) port of the ADSL modem router. These parameters apply to the Local (WAN) port of the ADSL modem router. The speed at which the modem is transmitting data to the ADSL line. DHCP IP Subnet Mask Domain Name Server (DNS) LAN Port MAC Address IP Address DHCP IP Subnet Mask Modem ADSL Firmware Version Modem Status Downstream Speed Upstream Speed Managing Your Network v3. 0, September 2005 6-5 DG834G Reference Manual Table 6-1. Field VPI VCI Menu 3. 2 - ADSL Modem Router Status Fields Description The Virtual Path Identifier setting. The Virtual Channel Identifier setting. Click the Show Statistics button to display ADSL modem router usage statistics, as shown below: Figure 6-4 This screen shows the following statistics:. Table 6-1. Field WAN or LAN Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time Poll Interval Router Statistics Fields Description The statistics for the WAN (Internet) and LAN ports. The number of packets transmitted on this port since reset or manual clear. The number of packets received on this port since reset or manual clear. The current line utilization--percentage of current bandwidth used on this port. Specifies the interval at which the statistics are updated in this window. Click Stop to freeze the display. 6-6 v3. 0, September 2005 Managing Your Network DG834G Reference Manual Click the Connection Status button to display ADSL modem router connection status, as shown. Figure 6-5 Clicking the Renew button updates the status information. This screen shows the following statistics: Table 6-1. Field IP Address Subnet Mask Default Gateway DHCP Server DNS Server Lease Obtained Lease Expires Connection Status Fields for Dynamic IP Description The IP Address assigned to the WAN port by the ADSL Internet Service Provider. The Network Mask assigned to the WAN port by the ADSL Internet Service Provider. The default gateway ADSL modem router assigned to the WAN port by the ADSL Internet Service Provider. Date and time the lease expires. Managing Your Network v3. 0, September 2005 6-7 DG834G Reference Manual An alternate view of the Connection Status screen is shown below: Figure 6-6 Clicking the Renew button updates the status information. This screen shows the following statistics: Table 6-1. Field Connection Time Connecting to Sender Negotiation Authentication IP Address Network Mask Connection Status Fields for PPPoA Description The time elapsed since the last connection to the Internet via the ADSL port. [. . . ] In this step, you will provide the type of encryption (DES or 3DES) to be used for this connection. This selection must match your selection in the VPN router configuration. a. In the Network Security Policy list on the left side of the Security Policy Editor window, expand the Security Policy heading by double clicking its name or clicking on the "+" symbol. Expand the Authentication subheading by double clicking its name or clicking on the "+" symbol. Then select Proposal 1 below Authentication. b. Figure C-20: Security Policy Editor authentication NETGEAR VPN Configuration v3. 0, September 2005 C-23 DG834G Reference Manual c. [. . . ]