User manual NETGEAR D6300

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. Phone (Other Countries): Check the list of phone numbers at http://support. [. . . ] If the service or application you want does not appear in the list, you have to define it as described in Add Custom Services to Allow or Block on page 80. Select the action you want for traffic covered by this rule: • BLOCK always. Allow the traffic covered by this rule, unless it is blocked according to the schedule specified on the Schedule screen in Schedule for Firewall Rules on page 82. Always allow the traffic covered by this rule (this selection is the default setting). • Security 79 D6300 WiFi DSL Modem Router • ALLOW by schedule , otherwise Block. Block the traffic covered by this rule, unless it is blocked according to the schedule specified on the Schedule screen in Schedule for Firewall Rules on page 82. ALLOW rules are useful only when the traffic is already covered by a BLOCK rule. You would use these rules when you want to allow a subset of traffic that is currently blocked by another rule. These settings determine which computers on your network are affected by this rule, based on their source (LAN) IP address. You have to fill in the Start and End fields when this option is selected. These settings determine which Internet locations are covered by the rule, based on their destination (WAN) IP address. You have to fill in the Start and End fields when this option is selected. This setting determines whether traffic covered by this rule is logged. This choice always logs traffic that is covered by this rule, whether it matches or not. This choice never logs traffic covered by this rule, whether it matches or not. Click Apply to have your changes take effect, or click Cancel to return to the previous screen. To allow or block an inbound service, click here to set up inbound firewall rules for gaming or other applications. You are redirected to the Port Forwarding/Port Triggering screen as described in Port Forwarding and Triggering on page 102. Add Custom Services to Allow or Block You can define your own incoming and outgoing custom services to allow or block. Once you add your own custom services, they are available on the Outbound Services screen (as described in Firewall Rules on page 78) and the Inbound Services screen (as described in Port Forwarding and Triggering on page 102). The Add Service screen displays: The Add Service screen allows you to specify or edit your own custom service definition. To add a service for blocking, first determine which port number or range of numbers is used by the application. [. . . ] FCC Guidelines for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. , 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the D6300 WiFi DSL Modem Router complies with Part 15 Subpart B of FCC CFR47 Rules. [. . . ]