User manual NETGEAR CENTRIA

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR web site. Phone (Other Countries): Check the list of phone numbers at http://support. [. . . ] For example, a packet that is sent with the destination port number 80 is an HTTP (web server) request. The service numbers for many common protocols are defined by the Internet Engineering Task Force (IETF at http://www. € Service numbers for other applications are typically chosen from the range 1024 to 65535 by the authors of the application. Although the router already holds a list of many service port numbers, you are not limited to these choices. Usually, you can determine this information by contacting the publisher of the application or the relevant user groups or news groups. The Block Services screen lets you add and block specific Internet services by computers on your network. To add a service for blocking, first determine which port number or range of numbers the application uses. If you selected Per Schedule, specify a time period in the Schedule screen as described in Schedule Blocking on page 87. From the Service Type list, select the application or service to allow or block. The list already displays several common services, but you are not limited to these choices. To add any additional services or applications that do not already appear, select User Defined. If you know that the application uses either TCP or UDP, select the appropriate protocol. If the application uses a single port number, enter that number in both fields. Select the radio button for the IP address configuration you want to block, and enter the IP addresses. You can block the specified service for a single computer, a range of computers with consecutive IP addresses, or all computers on your network. Security 86 CENTRIA WNDR4700/WNDR4720 Schedule Blocking You can specify the days and time that you want to block Internet access. Select days on which you want to apply blocking by selecting the appropriate check boxes, or select Every Day to select the check boxes for all days. € Time of Day to Block Select a start and end time in 24-hour format, or select All Day for 24-hour blocking. If you use daylight savings time, select the Automatically adjust for daylight savings time check box. Security 87 CENTRIA WNDR4700/WNDR4720 Security Event Email Notifications To receive logs and alerts by email, provide your email information in the Email screen, and specify which alerts you want to receive and how often. To receive email logs and alerts from the router, select the Turn Email Notification On check box. In the Your Outgoing Mail Server field, enter the name of your ISP’s outgoing (SMTP) mail server (such as mail. [. . . ] , 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the CENTRIA WNDR4700/WNDR4720 complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. Federal Communication Commision Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]