User manual NETGEAR A6200

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. Phone (Other Countries): Check the list of phone numbers at http://support. [. . . ] Either insert the USB adapter into a USB port on your computer, or connect it with the USB cable that came in the package. Maintenance 2 This chapter includes the following sections: • • • Other Screen Remove the genie Software Frequently Asked Questions (FAQs) 16 802. 11ac USB WiFi Adapter (A6200) Other Screen In NETGEAR genie, click the Other button to display the following screen: Sent/Receive Activity • • Sent Packets. Total number of packets sent during communication with the wireless network. Total number of packets received during communication with the wireless network. The IPv4 address can change if you disconnect from the network and rejoin it later. The IPv6 address can change if you disconnect from the network and rejoin it later. Wireless security used for the USB adapter to connect to the current wireless network. The MAC address is a unique 48-bit hardware address assigned to each wireless device. As a security measure, some wireless networks restrict access based on a list of known MAC addresses. If you try to join such a network, you have to provide your USB adapter’s MAC address (shown here) to the network administrator before you can connect. Your USB adapter automatically scans approved channels for your region when it checks to see which networks are available in your area. Operating the USB adapter in a different region might violate local laws. The genie displays the System Information screen and starts collecting system information, IP information, client driver and profile information, and site survey information. Click the Check button, and the genie displays the Live Check screen and checks for available software upgrades. If new software is found, the USB adapter software is automatically updated. € Note: During the software update process, the old software version is removed and all saved profiles are deleted before the new software version is installed. When the software update process is complete, the USB adapter no longer connects to the network automatically. The following screen displays if the USB adapter can connect to the network that you selected but you cannot access the Internet: Make sure that you are connected to the correct network. If you are, then check to see if the router’s Internet connection is working. If the router’s Internet connection is not working, restart the modem, router, and computer. When I connect to the network, I cannot access shared resources such as printers. [. . . ] This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 11ac USB WiFi Adapter (A6200) guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods: • Reorient or relocate the receiving antenna. € Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected. [. . . ]