User manual NEFF T43E10X1

[. . . ] 4 en Installation Instructions Assembly over dishwasher (figure 2c) S If the hob is installed over a dishwasher, an intermediate accessory must be installed. S The working surface upon which the hob is installed must be a minimum of 20 mm and a maximum of 40 mm thick. S The space between the top of the working surface and the top of the dishwasher must be: - 60 mm if installed over a compact dishwasher. Important notes S Safety in use is only guaranteed if the technical installation of the hob has been carried out correctly and in accordance with the installation instructions. [. . . ] You should therefore use the hotplate that is most suitable for the diameter of your pan. Double or triple hotplate These hotplates can detect pans of different sizes. Depending on the material and properties of the pan, the hotplate will adapt automatically, switching on part or all of the hotplate and supplying sufficient power to obtain good cooking results. Only use pans suitable for induction cooking, see the "Appropriate cookware" section. Residual heat indicator The hob has a residual heat indicator for each hotplate to show those which are still hot. Even when switched off, the œ/• light will remain on as long as the hotplate remains hot. If the pan is removed before the hotplate is turned off the œ/• indicators and the selected power level will appear alternately. 27 Programming the hob This section will show you how to program the hotplates. The basic Switching the hob on and off The hob is turned on and off with the main switch. To switch off: press the # symbol until the indicator above the main switch disappears. The residual heat indicator stays on until the hotplates have cooled down completely. Note: The hob switches off automatically when all the hotplates are switched off for more than 20 seconds.   Set the hotplate Select the required power level with the + and - symbols. To change the power level, press the + or - symbol until the required power level appears. Turning off the hotplate Press the + or - symbol until ‹ appears. Note: If no pan has been placed on the induction hotplate, the selected power level flashes. Power level Melt Chocolate, chocolate coating, butter, honey Gelatine Heating and warming Stew (e. 28 Power level Roasting Meat roll Roast Goulash Broil** Steaks, chops (plain or breaded) Beefsteak (3 cm thick) Chicken breast (2 cm thick) Fish and fish fillet without breading Fish and fish fillet with breading Prawns and shrimps Frozen meals (e. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childproof lock With this function, the childproof lock automatically activates when a hob is switched off. activating and deactivating See the “Basic Settings" section. Powerboost function The Powerboost function can be used to heat food more quickly than using the power level Š. [. . . ] The electronic system has overheated and all the hotplates have been switched off. The hotplate has been working non-stop too long at a high power level. Wait until the electronic system has cooled down sufficiently before The hotplate has overheated and has switched off in order to protect its cooking switching the hotplate back on. Normal noise while the appliance is working Induction heating technology is based on the creation of electromagnetic fields that generate heat directly at the base of the pan. [. . . ]