User manual NEFF T41D21X2

[. . . ] 28 Produktinfo Additional information on products, accessories, replacement parts and services can be found at www. Please keep the instruction and installation manual as well as the appliance certificate in a safe place for later use or for subsequent owners. If it has suffered any damage in transport, do not connect the appliance, contact the Technical Assistance Service and provide written notification of the damage caused, otherwise you will lose your right to any type of compensation. This appliance must be installed according to the installation instructions included. [. . . ] The Turning the hob on and off The hob is turned on and off using the main switch. The indicator located next to the main switch and the ‹ indicators of the hotplates light up. The residual heat indicator will remain lit until the hotplates have cooled down sufficiently. – basic setting appears: + symbol = power level 9 - symbol = power level 4 Notes The hob switches off automatically when all the hotplates are switched off for more than 20 seconds. The settings are memorised for 4 seconds after the hob has been turned off. If the hotplate is switched back on within this time then the previous settings will be applied. Changing the power level Select the hotplate and press the + or - symbol until the required power level comes on. To switch off the hotplate Select the hotplate and then press the + or - symbol until ‹ symbol appears. Notes ■ If no pan has been placed on the hotplate, the selected power level flashes. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level Š. Restrictions when using This function is available on all hotplates, provided that no other zone in the same group is working (see diagram). Otherwise, the ˜ and Š symbols will flash on the selected hotplate display; then the power level Š will be automatically set. The ˜ indicator will no longer be displayed and the hotplate will return to power level Š. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ■ ■ 3. Turning off a hotplate automatically The zone turns off automatically once the selected time has elapsed. 23 Note: The same cooking time can be automatically programmed for the all the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Press the 3 symbol and change the cooking time with the + or - symbols, or set to ‹‹. A warning signal sounds and ‹‹ appears for 10 seconds in the time program function display. Notes ■ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. – The timer The timer can be set for periods of up to 99 minutes. [. . . ] A high-pitched whistling sound This noise is produced mainly in pans made from different materials superimposed on one another, and it occurs when such pans are heated at maximum power on two hotplates at the same time. The whistling disappears or becomes fainter as soon as the power level is lowered. Noise from the fan For proper use of the electronic system, the temperature of the hob must be controlled. To do this, the hob has a fan which turns on when a high temperature is detected. [. . . ]