User manual NEFF T41B10X2

[. . . ] [es] Instrucciones de uso y montaje 3 [en] Instructions for installation and use 20 [el] Οδη 24 Changing the intensity of the 13 / 16 / 20 Amp connection current, figure 7. 35 20 INSTALLATION INSTRUCTIONS Assembly 21 22 Important notes Safety: Safety in use is only guaranteed if the technical installation of the hob has been carried out correctly and in accordance with the assembly instructions. The installation technician shall be liable for any damage caused as a result of unsuitable installation. The guidelines set out by the local electricity provider must be observed. [. . . ] If the pan is removed before the hotplate is turned off, the indicator œ or • and the selected power level will appear alternately. 28 Programming the hob This section will show you how to program the hotplates. The Turning the hob on and off The hob is turned on and off using the main switch. The indicator located next to the main switch and the ‹ indicators of the hotplates light up. The residual heat indicator will remain lit until the hotplates have cooled down sufficiently. – basic setting appears: + symbol = power level 9 - symbol = power level 4 Notes The hob switches off automatically when all the hotplates are switched off for more than 20 seconds. The settings are memorised for 4 seconds after the hob has been turned off. If the hotplate is switched back on within this time then the previous settings will be applied. Changing the power level Select the hotplate and press the + or - symbol until the required power level comes on. To switch off the hotplate Select the hotplate and then press the + or - symbol until ‹ symbol appears. Notes ■ If no pan has been placed on the hotplate, the selected power level flashes. – Set the hotplate Select the required power level with the + and - symbols. If a pan has been placed on the hotplate before switching on the hob, it will be detected within 20 seconds of pressing the main switch and the hotplate will be selected automatically. Once detected, select the power level within the next 20 seconds or the hotplate will switch off. If more than one pan is placed on the hob, only one will be detected when switching it on. when heating purées , creams and thick sauces , stir frequently. Power level Melting Chocolate, chocolate coating Butter, honey, gelatin Heating and keeping warm Stew (e. , Bearnaise, Hollandaise) Boiling, steaming, sautéing Rice (with a double amount of water) Rice pudding Potatoes Pasta* Soups Vegetables Greens, frozen foods Cooked in a pressure cooker Stewing Meat roll Stew Goulash Bake / Fry with a little oil** Steaks, chops (plain or breaded) Beefsteak (3 cm thick) Chicken breast (2 cm thick)*** Hamburgers, meatballs (3 cm thick)*** Plain fish and fish fillet Breaded fish and fish fillet Prawns and shrimps Frozen meals (e. 4-5 1-2 3-4 Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Activating and deactivating the childproof lock The hob should be turned off. [. . . ] The whistling disappears or becomes fainter as soon as the power level is lowered. Noise from the fan For proper use of the electronic system, the temperature of the hob must be controlled. To do this, the hob has a fan which turns on when a high temperature is detected. The fan may also work by inertia after the hob has been switched off, if the temperature detected is still too high. [. . . ]