User manual NEFF C7660

[. . . ] The water hardness can also be found out from your local water supply company. Switching on the appliance COFFEE q Press button 11 forwards and pull the drawer out of the appliance. q Press button d 1. i The appliance is ready for use when the illuminated rings on button d 1 and on the 2 on" button 2 are lit green. Note: If the appliance is being used for the first time or has not been operated for a prolonged period, the first cup of coffee will not have the full aroma and should not be drunk. Filling up the pipe system FILL UP PIPE-SYS PIPE-SYS FILLS UP PRESS CAFE For production reasons when switched on for the first time, the water pipe system in the appliance may occasionally have to be refilled: q Press the 2 on" button 2. 28 Selecting the language LANGUAGE ENGLISH To change the display to the desired language: q Hold down button % on the display 4 for at least 3 seconds. q Press the 6 button. Controls Mains switch 9 The mains switch 9 on the rear of the appliance switches the power supply on or off. [. . . ] q End the process by rotating the function selector 8 back to U. 33 Steam for heating drinks q Push up sleeve a on nozzle 13. LANGUE FRANCAIS IDIOMA ESPANOL Water hardness HARDNESS WATER 1 HARDNESS WATER 2 HARDNESS WATER 3 HARDNESS WATER 4 36 ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ LANGUAGE ENGLISH LINGUA ITALIANO TAAL NEDERL. SPRAK SVENSKA JASYK RUSSKIY q Determine water hardness with the supplied test strips, e. g. : q q q q q = hardness 2 Hold down button % on display 4 for at least 3 seconds. Note: It is important for the descaling programme that the water hardness is set correctly. If external water softeners are used in the domestic water system or if filtered water is used, select HARDNESS WATER 1. i The following languages are available: ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ Filter setting A filter 17 is available as an optional accessory for the water tank 19 (order no 46 1732). Note: Change or remove used filter 17 as soon as system message FILTER CHANGE is displayed!If a new filter is not inserted, check the setting for FILTER NO / OLD and the water hardness. Back to standby. ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ FILTER YES/NEW FILTER NO/OLD Temperature ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ TEMP. MAXIMUM Current time TIME --:-- The current time is programmed with this function. The set time will be deleted - if the mains plug is pulled out, - if the appliance is switched off with the mains switch 9, - if there is a power failure. The current time must be input again. ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ TIME 14:39 37 Timer ON AT --:-- The time at which the appliance will automatically switch on can be set with this function. q q q q q q q q De Hold down button % on display 4 for at least 3 seconds. activating the setting: ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ON AT 07:45 q Set the time to --:-- with < or >. Note: The current time must be set for this function to run. i The switch on time is retained even if there is a power failure or the mains switch 9 is actuated. This function is used to specify after how many hours following the last brew the appliance automatically switches to standby mode. failure or the mains switch 9 is actuated. Energy saving mode OFF IN 4 HOURS ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ OFF IN 2 hours i The switch off time is retained even if there is a power The number of brewed espressos, coffees and preground coffees is displayed here. BREWS - - - 86 i This number cannot be changed! Possible from Standby" mode only q Simultaneously hold down < and > for at least 3 seconds - all your saved settings are deleted. RESET function 38 System messages The appliance indicates processes and messages on display 4. Remedial action Pour fresh, cold water into the water tank 19. Note: There is always a small amount of water left in the water tank 19. Add coffee beans to the bean container 16. ADD BEANS No coffee beans. Note: The ADD BEANS display is lit until coffee is brewed again. Drawer 22 and drawer for coffee dregs 20 are full or contacts 24 are dirty. Press the 2on" button 2. FILL UP PIPE-SYS SYSTEM TOO HOT EMPTY TRAYS TRAYS MISSING CLEAN UNIT UNIT IS CALCIF. [. . . ] The descaling process can start. Eliminating minor faults yourself Fault ADD BEANS displayed despite full bean container. Current programming is set to: FILTER YES/NEW or FILTER CHANGE displayed. Set programming to FILTER NO/OLD Never descale with inserted filter Let out some of the hot water. Coffee has no crema" (layer of f h) (l f froth). Grind unit is not grinding coffee beans. [. . . ]