User manual NEC XV15+

[. . . ] NEC Value Series User's Manual 78131481 1 7/29/98, 8:44 AM WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK · DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] NEC cites recommended resolution at 75 Hz for 1280 x 1024 @ 55 to 60 Hz optimal display performance. 78131481 12 7/29/98, 8:44 AM Monitor Specifications Active Display Area (Factory Setting) Active Display Area (Full Scan) Power Supply Current Rating Dimensions Weight Environmental Considerations Operating Temperature: Humidity: Feet: Storage Temperature: Humidity: Feet: MultiSync® XV15+TM 260 x 195 mm 10. 2 x 7. 7 inches 280 x 210 mm 11. 0 x 8. 3 inches AC 100 ­ 120 V, 50/60 Hz 1. 8 Amps 372 mm (W) x 389 mm (H) x 414 mm (D) 14. 6 inches (W) x 15. 3 inches (H) x 16. 3 inches (D) 15. 6 kg 34. 4 lbs 0°C to 35°C / 32°F to 95°F 30% to 80% 0 to 10, 000 Feet -20°C to +60°C / -4°F to +140°F 10% to 90% 0 to 45, 000 Feet NOTE: Technical specifications are subject to change without notice. Notes Dependent upon signal timing used, and does not include border area. Dependent upon signal timing used, and does not include border area. 11 Specifications 78131481 13 7/29/98, 8:44 AM 12 Recommended Use · The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet which is easily accessible. · Clean the monitor with a lint-free, non-abrasive cloth and a nonalochol, neutral, non-abrasive cleaning solution or glass cleaner. For optimum performance, please note the following when setting up and using the MultiSync® XV15+TM color monitor: · If possible, position the monitor so that it is facing east to minimize the effects of the earth's magnetic field. · Allow adequate ventilation around the monitor so that heat can properly dissipate. · Changing the direction the monitor is facing while it is powered on may cause image discoloration. To correct this, turn the monitor off for 20 minutes before powering it back on. · Keep the monitor away from high capacity transformers, electric motors and other devices such as external speakers or fans which may create strong magnetic fields. Save packaging for transporting. 78131481 14 7/29/98, 8:44 AM Setting Up a Healthy Work Environment Making Your Computer Work For You Computers are everywhere. This section explains in detail how to set up your monitor to fit your physical needs along with a general explanation on setting up your workstation. For a complete, detailed explanation on setting up a healthy work environment, call NEC at (800) 820-1230, NEC FastFactsTM information at (800) 366-0476 and request document # 900108 or write the American National Standard for Human Factors Engineering of Visual Display Terminal Adjust your chair Workstations. Arrange Your Equipment Arrange your equipment so that you can work in a natural and relaxed position. Adjust your workstation setup to the proper height by lowering the table or stand that holds your computer equipment or raising the seat height of your chair. To create more desk space, you can put your computer base on the floor. 13 Adjust your keyboard and mouse Adjust your monitor 78131481 15 7/29/98, 8:44 AM 14 Setting Up a Healthy Work Environment · Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. · Rest your eyes periodically by focusing on an object at least 20 feet away. · Position the monitor at a 90° angle to windows and other light sources to minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen. · If reflected light makes it hard for you to see your screen, use an anti-glare filter. Use a lint-free, non-abrasive cloth and a non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner to minimize dust. · Adjust the monitor's brightness and contrast controls to enhance readability. · Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing. · Get regular eye checkups. Adjust Your Monitor Correct placement and adjustment of the monitor can reduce eye, shoulder and neck fatigue. [. . . ] For Information, Telephone 1-800-632-4662 NOTE: All Products returned to NECTECH for service MUST have prior approval; this may be obtained by calling the above number. This Product is warranted in accordance with the terms of this limited warranty. Consumers are cautioned that Product performance is affected by system configuration, software, the application, customer data, and operator control of the system, among other factors. Products are considered to be compatible with many systems, the specific functional implementation by the customers of the Product may vary. [. . . ]