User manual NEC XG1101

[. . . ] MultiSync XG75A MultiSync XG110LC MultiSync XG135LC Large Screen MultiSync Projection Monitor Operation Manual Model Number: XG-751/XG-1101/XG-1351 XG-751G/XG-1101G/XG-1351G For the customers in Germany CAUTION: To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. GSGV Acoustic Noise Information Ordinance: The sound pressure level is less than 70 dB(A) according to ISO 3744 or ISO 7779. 2 654321 654321 654321 654321 654321 654321 INTRODUCTION. Before operating this projector, please read this manual carefully and completely. This manual will provide you with the basic instructions for operation of the projector. [. . . ] A registered name is given as follows: VIDEO/S-VIDEO ----- Video standard with a list number e. g. NOTE: · If the Input list does not have any unassigned memory location starting at No. For signal registration see "SIGNAL ENTRY" in the Set-Up manual included only with the XG-1351/XG1101/XG-751 models, and if you own XG-1351G/XG1101G/XG-751G, contact your dealer. · The Automatic Save Feature is available only for signals listed in the INPUT LIST. NEW ENTRY?** NAME ******** YES NO 19 BASIC OPERATION Picture Adjustment To adjust the picture for each input, proceed as follows: NOTE: The color, sharpness, and tint controls are not selected in the "PICTURE" menu for RGB signal. The tint control is not selected in the "PICTURE" menu for SECAM/PAL signal. 2 Use the CURSOR or button to highlight the "1/PICTURE" line and press ENTER to display the "PICTURE" menu. You can also select the "PICTURE" menu directly by pressing the INPUT "1" button. ­ OPERATE ­ 1 2 3 4 5 6 7 8 / / / / / / / / PICTURE POSITION SOUND INPUT SELECT SOURCE INFO STATIC CLOSED CAPTION TIMER 3 Use the CURSOR or button to select a picture function and then press ENTER. You can also select an item directly by pressing the corresponding number button. Items to select: · BRIGHT (Brightness control) · CONTRAST (Contrast control) · COLOR (Color intensity control) · SHARPNESS (Picture detail control) · TINT (Red and green values control) NOTE: When you are in the BRIGHT adjustment mode, all the CRTs will be in use. · Wherever the END button is pressed, the screen changes in this order: "PICTURE" menu "OPERATE" menu Source screen ­ PICTURE ­ 1 2 3 4 5 / / / / / BRIGHT CONTRAST COLOR SHARPNESS TINT PICTURE ­ BRIGHT ­ 60% 20 BASIC OPERATION Position Adjustment Adjust the position(SHIFT), the size (IMAGE SIZE) and the screen area (BLANKING). 2 Use the CURSOR or button to highlight the "2/POSITION" line and press ENTER to display the "POSITION" menu. You can also select the "POSITION" menu directly by pressing the INPUT "2" button. ­ OPERATE ­ 1 / PICTURE 2 3 4 5 6 7 8 / / / / / / / POSITION SOUND INPUT SELECT SOURCE INFO STATIC CLOSED CAPTION TIMER 3 Use the CURSOR or button to select either "SHIFT", "IMAGE SIZE", or "BLANKING" and then press ENTER. You can also select each item directly by pressing the INPUT "1" , "2" or "3" button. Items to select · SHIFT (Position of the picture) · IMAGE SIZE (Picture size) · BLANKING(Screen area) ­ POSITION ­ 1 / SHIFT 2 / IMAGE SIZE 3 / BLANKING POSITION ­ SHIFT ­ 4 Adjust the position, size, or screen area. When selecting SHIFT: Use the CURSOR buttons to move the position of the picture. To do so: While displaying the SHIFT screen, press and hold CTL and press any one of the CURSOR buttons to display the SHIFT FINE screen. To return to the SHIFT screen, press and hold CTL, then press any one of the CURSOR buttons. H V +10% ­90% POSITION ­ S H I F T FINE ­ H V +10% ­90% 21 BASIC OPERATION When selecting IMAGE SIZE: Use the CURSOR buttons to adjust the size of image. · Pressing or button increases or decreases the horizontal size. · Pressing or button increases or decreases the vertical size. POSITION ­ IMAGE SIZE ­ H V +10% ­90% When selecting BLANKING: 1) Hold down the CTL button and press CURSOR buttons to choose the right, left, top, or bottom edge. · Whenever the END button is pressed, the screen changes in this order: "POSITION" menu "OPERATE" menu Source screen POSITION ­ BLANKING ­ SCREEN ­ TOP ­ 60% 22 BASIC OPERATION Sound Adjustment (only when used with the ISS-6020/ISS-6020G Switcher) Adjust the volume to your preference. 2 Use the CURSOR or button to highlight the "3/SOUND" line and press ENTER to display the "SOUND" menu. [. . . ] 610(W)X812(D)X325(H) mm 24. 02(W)X31. 97(D)X12. 80(H) inch Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . 63. 0 kg/139. 0 lbs(XG-751/XG-751G) 67. 4 kg/148. 7 lbs (XG-1351/XG-1351G/XG-1101/ XG-1101G) Remote control . . . . . . . . . . . . . . Wired application Wireless (operating distance 7m/23ft. ) Remote control functions . . . . . User remote (RC-6320); Power ON/OFF, Input signal select, Picture mute, Bright, Contrast, Color 1), Sharpness 1), Tint 2), Volume 3), Sound mute 3), Source information, Static convergence, Normalize, Enter, End, Closed Caption Full function remote (RC-6321); Test, Display, Help, Information, Input list, Static focus, Edge focus, H/ V position, White balance select, Static convergence, Wave convergence, Point convergence, H/V amplitude, H/V linearity, H/V key-stone, H/V pincushion, H/V blanking, Tilt, Skew, H/V bow, Store, Normalize, Enter, End Main control function . . . . [. . . ]