User manual NEC WT610

[. . . ] Projector WT615/WT610 User's Manual The WT615 projector is not distributed in the U. S. A or Canada. Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC WT615/WT610 Projector and keep the manual handy for future reference. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. REFER SERVICING TO QUALIFIED NEC SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. [. . . ] Use the same procedures as steps 1 to 7 described in the "Assigning a Keyword for the first time" section to enter "1234". Each time one number is entered, an "t" (asterisk) will appear. After entering your keyword, select "OK" and press the ENTER button. Highlight "Enable" and press the SELECT button to select "Disable". 9. Press the SELECT button to select "OK" and press the ENTER button. However, if you forget your keyword, NEC will provide you with your Release Code. 61 4. Convenient Features ¸ Using a USB Memory Device or USB Memory Card Reader The projector is compatible with either a USB memory device (A USB memory device is supplied with the WT615) or USB memory card reader which supports the viewer and security features. [Important] When saving captured images to a USB memory device on the WT615, be sure to use the USB memory device included with the WT615. Using a USB memory card reader may cause damage to a flash memory card. · · · To use a USB memory device or USB memory card reader, connect the device to the USB port (type A). Select one of the drive icons for your USB memory in a pane on the left side of the Viewer window. To use a USB memory device as a Protect key for Security function, select one from the Drive icons in the Security setting screen. The drive icon is not displayed on the WT610. REMOTE PCCONTROL IN PC CARD USB AUDIO IN AUDIO OUT DVI-I COMPUTER AUDIO IN VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT R L /MONO USB · NOTE: · Some USB memory devices (brands) or USB memory card readers may not work. · The projector does not support NTFS formatted flash memory card or USB memory device. Be sure to use a flash memory card or USB memory device formatted with the FAT32, FAT16 or FAT file system. To format your flash memory card or USB memory device in your computer, refer to the document or help file that comes with your Windows. · You cannot use a USB memory device and a USB memory card reader when connecting a USB mouse to the projector. · Do not do the following while the USB memory device or USB memory card reader's access indicator is lit or flashing (while data is being accessed. ) Doing so can damage your USB memory device or USB memory card reader in the reader. * Pulling out the USB memory device or USB memory card reader from the USB port of the projector. * Pulling out the memory card from the USB memory card reader * Turning off the main power switch or unplugging the power cable. · The drive for "USB 1-4" is displayed only when the USB memory device or USB memory card reader is connected to the projector. The drive for "USB 1-4" may be displayed differently from the one in the USB memory card reader. · Some USB memory devices (brands) or USB memory card readers cannot be used as Protect key for the projector's Security function. 62 4. [. . . ] NEC SOLUTIONS' LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT AT NEC SOLUTIONS' OPTION. REPLACEMENT PRODUCTS MAY BE NEW OR RECONDITIONED PRODUCTS, AND REPLACEMENT PARTS MAY BE NEW OR SERVICEABLE USED PARTS. The following are not covered by the limited warranty and NEC Solutions shall not be liable for: 1. or Canada by NEC Solutions or which is not purchased, installed, and operated in the U. S. A or Canada. [. . . ]