User manual NEC VERSABAY IV DRIVE

[. . . ] NEC Versa VersaBay IV Drive Congratulations on purchasing an NEC® VersaBayTM IV drive for your NEC Versa® notebook computer!Use this document if you have one of the following VersaBay IV drives: ! [. . . ] Press this button when power is on to insert a CD into or remove a CD from the drive. Do not eject the CD or turn off the NEC Versa notebook when the indicator is lit. ! Removing a Device from the VersaBay IV Slot Before installing your new NEC VersaBay IV drive, remove any device or the weight-saving module (if in place) from the VersaBay IV slot as follows. 1. If a VersaBay IV device is in the slot, use the Phoenix® BaySwapTM utility or power off the system. (See your printed user's guide for information about the Phoenix BaySwap utility. ) If a VersaBay IV weight-saving module is in the VersaBay IV slot, skip to step 2. If you plan to hot swap a VersaBay IV battery and the system is not connected to an AC power source, verify that the primary battery is not in a low-power state. 4. Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot. Pull the device out of the system. Removing a device from the VersaBay IV slot Always install the weight-saving module in the VersaBay IV slot if you don't install a VersaBay IV device. The weight-saving module shipped with your system. 2 NEC VersaBay IV Drive Installing the Drive in the NEC VersaBay IV Slot Use the following steps to install your new VersaBay IV device in the VersaBay IV slot. 1. If you need to remove a device from the VersaBay IV slot, see "Removing a Device from the VersaBay IV Slot, " earlier in this document. For information on hot swapping or warm swapping devices, see the information about the Phoenix BaySwap utility in your printed user's guide. 2. 4. Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot. Align the drive in the NEC VersaBay IV slot and push it in until it fits securely into the bay. Inserting an NEC VersaBay IV drive 5. Press the Power button to power on or resume operation. NEC VersaBay IV Drive 3 Further Information See the printed NEC Versa user's guide for further information about: ! [. . . ] All other trademarks and registered trademarks are the property of their respective owners. ©2001 NEC Computers Inc. 819-200744-000 04/2001 *819-200744-000* 4 NEC VersaBay IV Drive [. . . ]