User manual NEC VERSA TXI AC ADAPTER

[. . . ] NEC Versa TXi AC Adapter Important Information Congratulations on purchasing the NEC Versa® AC adapter! [. . . ] The AC adapter is intended for use with a computer and must meet EN609050 standards. The AC adapter for the NEC Versa TXi is intended for use in AC power sources within the range of 100-240 volts AC and 50-60 Hz. Although other AC adapters may look similar, using them can damage the system. Connecting the AC Adapter The AC adapter, when connected, charges the battery (or batteries) whether or not the computer is powered on. 2. Connect the AC adapter cable to the power port on the left side of your NEC Versa (see the figure on the following page). Plug one end of the AC power cord into the AC adapter and the other end into a properly grounded 120- or 240-volt, 50- or 60-Hz wall outlet (see the figure on the following page). Note Australia, Europe, and Asia use an AC power cord specific to each country's standards, so it may not resemble the power cord in the figure. Information in this publication is subject to change without notice. registered trademark of NEC Corporation and/or one or more of its subsidiaries. All other trademarks and registered trademarks are the property of their respective owners. [. . . ] ! Input: 100 to 240 Volts (V) AC, 50 or 60 Hz, 1. 3 ­ 0. 65 A Output: 15. 0 V DC, 4A Australia, Europe, and Asia use an AC power cord specific to each country's standards. 819-200741-000 04/2001 *819-200741-000* 2 NEC Versa TXi AC Adapter [. . . ]