User manual NEC VERSA LITEPAD TABLET PC BATTERY PACK

[. . . ] Installing another manufacturer's battery or using a combination of very old and new batteries can deteriorate battery and equipment performance. 1. While holding the release button, slide the battery out of the battery bay. Releasing the battery pack A ­ Battery Release Button B ­ Battery Pack NEC Versa LitePad Tablet PC Battery Pack 1 Removing the battery pack 4. Insert the new battery pack as follows: Align the battery connector and slots with the battery bay connector and tabs. Align the grooves on the sides of the battery with the rails in the battery bay. [. . . ] Metal objects in contact with the connectors can cause a short circuit and damage. If the battery leaks: If the battery leaks onto skin or clothing, wash the area immediately with clean water. If battery fluid gets into eyes, DO NOT rub; rinse with clear water immediately and consult a doctor. There is a danger of ignition or explosion. NEC Versa LitePad Tablet PC Battery Pack 3 Using the Battery Pack See the table "Tablet PC Status LEDs" in Chapter 1 of the NEC Versa LitePad Tablet PC User's Guide for a description of the Power and Battery LED status. Also see "Determining Battery Status" and "Identifying Low Battery Status" in this document for battery power information. Note See "Windows Power Management" in Chapter 4 of the NEC Versa LitePad Tablet PC User's Guide to fully utilize battery power in your NEC Versa LitePad tablet PC. To prevent data loss, fully charge the battery pack before running the tablet PC on battery power (see "Connecting the AC Adapter" in Chapter 2 of the NEC Versa LitePad Tablet PC User's Guide). To prevent accidental battery ignition or explosion, adhere to the following: Keep the battery away from extreme heat. Keep metal objects away from the battery connectors to prevent a short circuit. Make sure the battery is properly installed in the battery bay. Keep the following in mind when using the battery pack. Keeping system power on can degrade battery performance and shorten battery life. Keep the battery out of the reach of children. Determining Battery Status Your tablet PC provides tools to help you keep track of the battery's power level. If your system is configured to display the Power icon on the taskbar, the following taskbar icons appear: An electrical plug appears when the system is connected to an AC power source. A battery icon always appears when the system is not connected to an AC power source. To show the Power icon on the taskbar when connected to AC power, tap the Windows Start button, select Control Panel, select Performance and Maintenance, and select Power Options. From the Power Options Properties window, select the Advanced menu and select the option "Always show icon on the taskbar. " Use the system's power meter to determine battery status. Access the system's power meter in the following ways: If the Power icon is configured to display in the taskbar, point to the Power icon to display the remaining battery power. Go to Start, Control Panel, select Performance and Maintenance, and select Power Options. Power status displays the total battery power remaining. 4 NEC Versa LitePad Tablet PC Battery Pack Identifying Low Battery Status When battery power is low (10% or less), the power LED lights yellow (blinks in Standby mode). [. . . ] Turn off the system when you finish using it. Note NEC Solutions America recommends that you always operate your system on AC power when using any external device. Information in this publication is subject to change without notice. NEC and Empowered by Innovation are either registered trademarks or trademarks of NEC Corporation. All other trademarks and registered trademarks are the property of their respective owners. [. . . ]