User manual NEC VERSA 6260

[. . . ] NEC Computer Systems Division, A Division of Packard Bell NEC, Inc. DECLARATION OF CONFORMITY We, the Responsible Party NEC Computer Systems Division Packard Bell NEC, Inc. 1414 Massachusetts Avenue Boxboro, MA 01719 (978) 264-8000 declare that the product NEC V6220/6230/6260 is in conformity with part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. NECCSD and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. [. . . ] Put your CD, printed side up, into the circular impression in the tray. Push the CD tray in until it clicks shut. 4-12 Using Your NEC Versa Some CDs vibrate when playing. This does not effect the CD-ROM reader. NOTE CD Care When handling CDs, keep the following guidelines in mind. T Always pick up the disc by its edges. Holding a CD T T T T Avoid scratching or soiling the side of the disc that has no printing or writing on it. Clean fingerprints or dust from the disc by wiping it with a soft cloth. Gently brush the cloth from the center of the disc toward the edge. Using Your NEC Versa 4-13 ! CAUTION Avoid using benzene, paint thinner, record cleaner, static repellent, or any other chemical on the disc. Chemicals and cleaners can damage the disc. Changing the Auto Play Setting Your system is not configured so that a CD inserted into the reader will automatically start playing. Although this feature makes using your CDs very convenient, it interferes with the system's power management function. Follow these instructions to enable or disable the Auto play feature. 1. Press the properties button at the bottom of the window and select the Settings tab. 7. Proceed as follows: T T To enable Auto Play, click to add a check mark next to the line "Auto insert notification. " To disable Auto Play, click to remove the check mark next to the line "Auto insert notification. " 8. Select OK twice to accept the settings in the Settings tab and exit the Properties window. 9. To activate the new setting, reboot the system when prompted. 4-14 Using Your NEC Versa CARD BUS/PC CARD SLOTS Your NEC Versa 6200 Series notebook integrates two card bus slots for inserting two Type II PC cards or one Type III PC card. The 32-bit card bus also has zoomed video support in the bottom slot only. NOTE The 32-bit Card Bus structure is backward compatible, but also accepts new Card Bus cards. Using the system's card bus slots, you can add optional PC cards and connect external devices to your NEC Versa. These devices include peripheral devices, such as modems, LAN cards, and storage cards. For details on how to obtain these options, see the online Versa Tools Catalog. Also, for more information about PC card technology, see the online Advanced Topics in the NEC Versa Help Center. Inserting a PC Card To insert a PC card, open the slot cover and follow these steps. 1. Align the card so that the 68-pin connector points towards the slot and the arrow shows on the top face of the card. 2. A low tone followed by a high tone lets you know that the card is fully inserted and recognized. (If you turn off the sound through the function keys or volume control, no sound is emitted. ) Other tone sequences such as high, then low tones, indicate that the card is inserted, but the card type is unknown. Using Your NEC Versa 4-15 Inserting a card 3. Use the software preinstalled on your system to check PC card slot availability. To do so, look for the CardWizardTM SystemSoft icon on the Windows NT desktop or the Windows for Workgroups Program Manager. In Windows 95, look for the PC Card icon in the control panel or on the right side of the taskbar. [. . . ] A single USB port allows you to connect up to 127 peripheral devices such mice, modems, and keyboards. USB may eventually replace serial and parallel ports. V VGA Video Graphics Array. Graphics technology that supports up to 256 colors and a graphics resolution of 640 by 480 pixels. volatile memory Storage media that loses its data when system power is turned off. Standard memory and memory that you add to the NEC Versa are volatile memory. [. . . ]