User manual NEC PX42M4A

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Technologies Important Information Precautions Please read this manual carefully before using your NEC PlasmaSync - 42inch Plasma Monitor PX-42M4A and keep the manual handy for future reference. Warnings and Safety Precaution The NEC PlasmaSync 4205W is designed and manufactured to provide long, trouble-free service. Never use solvents such as alcohol or thinner to clean the panel surface. Although NEC produces the plasma display panels with more than 99. 99 percent active cells, there may be some cells that do not produce light or remain lit. For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. [. . . ] * The picture has the same size as video pictures (16 : 9). The normal size screen is displayed. * The picture has the same size as video pictures with a 4 : 3 aspect ratio. FULL size screen The image is expanded in the horizontal direction. * Images compressed in the horizontal direction ("squeezed images") are expanded in the horizontal direction and displayed on the entire screen. (Normal images are expanded in the horizontal direction. ) 15 Watching computer images with a wide screen Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. Press the "WIDE / AUTO WIDE" button on the remote controller. The screen size switches as follows: NORMAL FULL Information · Supported resolution When 800 dot 600 line signals are input, they are converted to 640 dot 480 line or 853 dot 480 line signals. When 1024 dot 768 line signals are input, they are converted to 614 dot 460 line or 853 dot 460 line signals. When 1280 dot 1024 line signals are input, they are converted to 640 dot 478 line. See page 44 for details on the display output of the various vesa signal standards supported by the monitor. When 852 dot 480 line wide VGA (*) signals with a vertical frequency of 60 Hz and horizontal frequency of 31. 72 kHz are input, select "WIDE" for the "RGB SELECT" setting. Since selecting an 848 480 signal automatically displays the image in correct size, it is not necessary to change the RGB SELECT setting. · · · NORMAL size screen (4:3) * "IBM PC/AT" and "VGA" are registered trademarks of IBM, Inc. of the United States. The picture has the same size as the normal computer image. FULL size screen The image is expanded in the horizontal direction. When using a graphic accelerator boad that is capable of displaying 848 480. FULL size screen 16 OSM(On Screen Menu) Controls Menu Operations The OSM window is displayed with respect the to screen as shown on the diagram. * Depending on the screen's mode, the OSM may be displayed slightly differently. In the explanation, the OSM section is shown close up. MAIN MENU PICTURE SOUND SCREEN FUNCTION INFORMATION 5. Repeat steps 2 ­ 5 to adjust an additional item, or press the MENU button on the remote controller to exit the menu display. SEL. O K OK MENU EXIT The following describes how to use the menus and the selected items. Press the MENU button on the remote controller to display the MAIN MENU. MAIN MENU PICTURE SOUND SCREEN FUNCTION INFORMATION SEL. Press the cursor buttons v w on the remote controller to highlight the menu you wish to enter. Press the OK button on the remote controller to select a submenu or item. PICTURE PICTURE MODE : MEMORY CONTRAST : BRIGHTNESS : SHARPNESS : COLOR : TINT : COLOR TEMP : 2 SEL. [. . . ] Transmission Data 9FH 80H 60H ACK 3FH 60H 80H 3FH 3FH 00H 00H CKS CKS 42 08. OSD Select Function The external control equipment switches on or off the on-screen display (OSD) of the PlasmaSync 4205W. Transmission Data DFH 80H 60H DATA00 ACK 7FH 58H 01H DATA00 CKS 01H : Screen display On 02H : Screen display Off 80H 58H 01H DATA00 CKS 60H DATA00 01H : Screen display On 02H : Screen display Off * Screen display On/Off is equivalent to the screen display On/Off function of the convenient function settings. Operation is as described in the table below. On-Screen Display (OSD) Operation Remote control operation Personal computer control operation Display of items and adjustments on the menu Yes No Yes No Volume display, input display, and screen size display Yes Yes No No When screen display is ON When screen display is OFF When screen display is ON When screen display is OFF 43 Table for Signals Supported Supported resolution · When 800 dot 600 line signals are input, they are converted to 640 dot 480 line or 853 dot 480 line signals. [. . . ]