User manual NEC PX-60XM5A

[. . . ] Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Continued operation at line voltages greater than 100 V to 240 V AC will shorten the life of the unit, and might even cause a fire hazard. Do not hit or scratch the panel surface as this causes flaws on the surface of the screen. For correct installation and mounting it is strongly recommended to use a trained, authorized dealer. [. . . ] Information Power management function * The power management function automatically reduces the monitor's power consumption if the computer's keyboard or mouse is not operated for a certain amount of time. * If the computer's power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state. * For instructions on using the computer's power management function, refer to the computer's operating instructions. Power management settings ON: In this mode the power management function is turned on. Power management function and POWER/ STANDBY indicator The POWER/STANDBY indicator indicates the status of the power management function. Reducing image retention The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce image retention. horizontal and/or Operate the keyboard or vertical synchronizing mouse. Information PLE settings AUTO: The brightness of the screen is adjusted automatically to suit the picture quality. INVERSE Use this to set the inverse mode or to display a white screen. AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a DVD/HD/DTV signal is input. AUTO2: The picture moves around the screen intermittently, making the picture bigger. * When a Video or a DVD/HD/DTV signal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger. adjust the ORBITER function manually Set the amount of shift and the time between movement. Example: Setting so that the picture moves 2 dots horizontally and 4 lines vertically every 3 minutes. Information INVERSE Settings ON: The picture is displayed alternately between positive image and negative image. You can set the time by pressing the MENU/ENTER button while "ON" is set. You can set the time by pressing the MENU/ENTER button while "ON" is set. Example: Setting to that the INVERSE mode starts in 2 hours and proceeds for one hour and a half. wAITING TIME: Set the standby time until the "INVERSE/WHITE" mode starts. * The "WAITING TIME" can not be set when the "WORKING TIME" is ON. * THE "WORKING TIME" and "WAITING TIME" can be set for up to 12 hours and 45 minutes in units of 3 minutes. [. . . ] Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage. Please also include in any mailing your name, address and a description of the problem(s). For the name of the nearest NEC Corporation of America authorized service center, call NEC Corporation of America at 800-836-0655. LIMITATIONS OF LIABILITY Except for the obligations specifically set forth in this warranty statement, we will not be liable for any direct, indirect, special, incidental, consequential, or other types of damages, whether based on contract, tort, or any other legal theory, whether or not we have been advised of the possibility of such damages. [. . . ]