User manual NEC POWERMATE V AND P SERVICE MANUAL

[. . . ] This information applies to computers with the following model numbers: T EM-2120-24853E T EM-2120-24853CE T EM-2130-24853E T EM-2130-24853CE. This addendum also includes updated procedures for setting up and installing the system and illustrated parts lists. The manual is written for NECCSD-trained customer engineers, system analysts, service center personnel, and dealers. The manual is organized as follows: Section 1 -- Technical Information, provides information not available when the PowerMate P ETC Series User's Guide (819-181784-000) was printed. System specifications are listed including dimensions, weight, environment, safety compliance, power consumption, and memory. [. . . ] The controller accepts requests from peripherals, issues interrupt requests to the processor, resolves interrupt priorities, and provides vectors for the processor to determine which interrupt routine to execute. The interrupt controller has priority assignment modes that can be reconfigured at any time during system operations. Interrupt level assignments 0 through 15 are in order of decreasing priority. (1. 6 to 1. 8 kg) Four accessible slots: -- one 1-inch high 3 1/2-inch front access slot (contains standard 1. 44-MB diskette drive) -- three 1. 6-inch high 5 1/4-inch slots (some models contain a CD-ROM reader) Two internal 3 1/2-inch slots (one contains a hard disk) Expansion Slots Five in the minitower: -- two 8-/16-bit ISA slots -- one shared 8-/16-bit ISA/32-bit PCI slot -- two 32-bit PCI slots One ISA slot contains a network interface board. Network Interface 3COM 3C509B ISA 10 Megabit board with adapter (RJ-45, AUI, 10BASE-T) Access to the connectors is provided at the rear of the system unit. All configurations come with Ethernet drivers preloaded on the hard drive. Peripheral Interface PS/2-style 6-pin keyboard connector (mini DIN), rear panel PS/2-style 6-pin mouse connector (mini DIN), rear panel Two RS-232C serial ports using 165550 UART, rear panel Two USB ports, rear panel Parallel printer port (25-pin), rear panel VGA port (6-pin D-shell), rear panel Power button Power indicator lamp Hard disk drive busy indicator lamp Suspend button Reset button System Specifications Specification Keyboard Device Slots Front Panel 1-10 Technical Information Table 1-6 Item Microprocessor PowerMate P2166 PowerMate P2200 Cache Memory System Specifications Specification Intel Pentium (processor type dependent on system) 166-MHz Pentium 200-MHz Pentium 16 KB of primary cache (8 KB data, 8 KB instruction) integrated in the processor, 256 KB secondary cache built-in on system board 128-KB (28F001) Flash ROM Intel 82430HX PCI Chip Set 16 MB standard, expandable to 384 MB using 72-pin SIMM sockets on system board and optional SIMM modules 4-, 8-, 16-, 32-, and 64-MB; 32-bit, non-parity, 60-ns or 70-ns SIMMs ATI-based, DDC 2B compliant controller PCI GUI Accelerator and Motion Video Playback Controller PCI-Bus Video 2 MB SGRAM standard (upgradable to 4 MB with 3-MB upgrade module installed) Maximum resolution 1600 x 1200 pixels (with 3-MB upgrade module installed Replaceable coin-type battery 200-Watt, 115 V/230V switch selectable Input 100 V to 120 V ­ 5. 0 A Input 200 V to 240 V ­ 3. 0 A Output +12 V ­ 8 A Output +5 V ­ 23 A Output -12 V ­ 0. 5 A Output -12 V ­ 0. 5 A See Appendix D of the service and reference manual for specifications Flash ROM Chip Set System Memory Optional SIMMs Integrated Graphics Battery Power Supply CD-ROM Reader (multimedia systems only) Integrated Sound Creative Labs Vibra 16C standard in multimedia systems Stereo jacks for microphone in and line out ® Sound Blaster compatible FM synthesis Ad Lib, MPC II, Multimedia PC Level 2 compliance Built-in MPU-401 MIDI and game port interface Technical Information 1-11 Table 1-6 Item 20-Watt Speakers System Specifications Specification Standard in multimedia models Magnetically shielded 20-watt stereo speakers Power on/off switch, power lamp, volume control Treble and bass tone control Built-in stereo amplifier 20W RMS power output 2-way speaker system 2-inch tweeter 4-inch woofer Subwoofer output jack External DC jack Headphone jack AC adapter 120V to +15V, - 15V Dimensions 5 in. (28 cm) H Temperature ­ 50°F to 95°F Relative Humidity ­ 20% to 80% UL 1950 ­ safety CSA C22. 2 No. 950-m89 TUV EN60950: 1988 FCC part 15, Subpart J, Class B ­ emissions FCC part 68 C. R. C. , c. 1374 Non-multimedia systems are Energy Star compliant IEC 950 ­ safety VDE 0871/6. 78, Class B ­ emissions Recommended Operating Environment Administrative Compliance Section 2 Setup and Installation This section contains information on setting up PowerMate® P ETC Series systems. The following figure shows the location of the interface ports on the rear of the system unit for configuring PowerMate P ETC Series hardware. Use the procedures described in Section 2 of the PowerMate V & P Series Service and Reference Manual to set up the system hardware. For other setup information, see the PowerMate V & P Series Service and Reference Manual Addendum. Figure 2-1 Rear Panel I/O Ports In addition, refer to the following figure for the location of the network interface board connectors. 2-2 Setup and Installation Figure 2-2 Network Interface Board Connectors The network board has connectors for coaxial and twisted-pair network cabling: T The BNC connector supports thin coaxial cables. T The RJ-45 connector supports twisted-pair 10BASE-T cables. Connect the network cable to one of these connectors (depending on the type of network). The PowerMate P ETC Series computer has Ethernet network drivers pre-loaded on the hard disk. Section 3 Illustrated Parts Breakdown This section contains updated parts lists and an exploded-view diagram for the PowerMate P ETC Series minitower system. The information in this section applies to the following models: T EM-2120-24853E T EM-2120-24853CE T EM-2130-24853E T EM-2139-24853CE. Table 3-1 lists the field-replaceable parts for the computer*. To order parts or obtain technical help, call 1-888-ETC-SUPT (1-888-382-7878). * This data was prepared July 1997. For an up-to-date listing of spare parts, please call FaxFlashTM at 1-888-329-0088 (or 1-508-635-6090 outside the U. S. ) and order document number 42181820. 3-2 Illustrated Parts Breakdown Table 3-1 Item 1 2 3 4 5 6 7 8 PowerMate P ETC Series Field-Replaceable Parts List* Part Number 158-050454-002 158-052170-001 158-052169-000 158-050895-004 158-050685-031 158-052115-000 158-052121-000 158-052116-001 Description Serial interface cable LED power cable Hard disk power cable Sleep switch cable assembly Reset switch cable assembly Mouse, PS/2-style Keyboard, Chicony Microphone, with green connector (multimedia models only) Reset/sleep button Front bezel with IR (PowerMate P2166 and P2200 models) Fan assembly, 2-wire Power supply, 200 watt, HIPRO (PowerMate P2166 and P2200 models) Speakers, 20-watt (multimedia models only) Floppy drive signal cable, 655 mm 3-connector IDE signal cable, split, 3-connector IDE signal cable, 2-connector, 10-inch (multimedia models only) Audio cable, CD-ROM, 2-connector (multimedia models only) ISA/PCI backplane (minitower) Heatsink w/clip 166-MHz Pentium processor (PowerMate P2166) 200-MHz Pentium processor (PowerMate P2200) 8-MB EDO SIMM (2MB x 32) 9 10 11 12 158-050896-003 158-050129-000 158-050865-006 158-050-684-002 13 14 15 16 17 18 19 20a 20a 21 158-050979-000 158-050857-001 158-050836-002 158-050562-004 158-050824-000 158-026232-000A 158-060324-001 158-082502-017 158-082502-019 158-082630-060 * This data was prepared July 1997. For an up-to-date listing of spare parts, please call FaxFlashTM at 1-888-329-0088 (or 1-508-635-6090 outside the U. S. ) and order document number 42181820. Illustrated Parts Breakdown 3-3 Table 3-1 Item 22 23a 23b 24 25 26 27 28 29 30a 30b PowerMate P ETC Series Field-Replaceable Parts List* Part Number 158-052137-100A 158-056561-000 158-056562-000 215-00031 158-050796-000 CDR-1450A/BR 158-056414-000 158-050865-008 158-050893-000 158-030782-021 158-030782-019 Description 1-MB SGRAM video memory module (non-multimedia models only) System board, without audio System board, with audio 3 1/2-inch, 2. 1-GB IDE hard disk, WD Caviar AC22100 Network interface card (NIC) IDE CD-ROM reader (8-speed) 3-1/2 inch 1. 44-MB diskette drive, without bezel, with LVR Speaker assembly, internal, with cable, 381mm, DT Rail kit I/O plate without LAN, without audio I/O plate without LAN, with audio Not shown in Figure 3-1. * This data was prepared July 1997. For an up-to-date listing of spare parts, please call FaxFlashTM at 1-888-329-0088 (or 1-508-635-6090 outside the U. S. ) and order document number 42181820. 3-4 Illustrated Parts Breakdown Figure 3-1 PowerMate P ETC Series Illustrated Parts Breakdown* * This data was prepared July 1997. For an up-to-date listing of spare parts, please call FaxFlashTM at 1-888-329-0088 (or 1-508-635-6090 outside the U. S. ) and order document number 42181820. Illustrated Parts Breakdown 3-5 Table 3-2 lists PowerMate P ETC Series documentation and packaging part numbers. Table 3-2 Description PowerMate P ETC Series Documentation and Packaging* Part Number 819-181784-000 819-181519-000 819-181667-000 819-181820-000 158-040395-004 158-040563-001 158-040562-001 PowerMate P ETC Series User's Guide PowerMate V & P Series Service and Reference Manual PowerMate V & P Series Service and Reference Manual Addendum PowerMate P ETC Series Addendum to the PowerMate V &P Series Service and Reference Manual Corner blocks (requires 4) Shipping carton (multimedia) Shipping carton (non-multimedia) * This data was prepared July 1997. [. . . ] Discard used batteries according to the manufacturer's instructions. ATTENTION: Il y a danger d'explosion s'il y a replacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d'un type recommandé par le constructeur. Mettre au rébut les batteries usagées conformément aux instructions du fabricant. BATTERY DISPOSAL Do not place used batteries in your regular trash. [. . . ]