User manual NEC PLASMASYNC PX-61XM1A

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Technologies Important Information Precautions Please read this manual carefully before using your NEC plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The NEC plasma monitor is designed and manufactured to provide long, trouble-free service. Never use solvents such as alcohol or thinner to clean the panel surface. Although NEC produces the plasma display panels with more than 99. 99 percent active cells, there may be some cells that do not produce light or remain lit. For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. [. . . ] and The mode switches as follows when the buttons are pressed: MEMORY THEATER NORMAL RESET PICTURE MODE : THEATER * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 20 Setting the color temperature Use this procedure to set color tone produced by the plasma display. Example: Setting "1" Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "PICTURE", then press the PROCEED button. Use the L and M buttons to select "COLOR TEMP. ". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. To delete the main menu, press the EXIT button once more. Information Setting the color temperature 1 . . . . . . . . . . . . . . . . . . . . . . Low (redder) Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. G EXIT RETURN 3. and The mode switches as follows when the buttons are pressed: 1 2 3 PRO * See page 22 to set "PRO". COLOR TEMP. : 1 * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 21 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality. Example: Adjusting the "WHITE BALANCE" Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "PICTURE", then press the PROCEED button. Use the L and M buttons to select "COLOR TEMP. ". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. Use the L and M buttons to select "RED-GAIN". WHITE BALANCE GAIN RED GREEN BLUE BIAS RED GREEN BLUE SEL. ADJ. EXIT RETURN 6. Adjust the white balance using the and buttons. G R-GAIN EXIT RETURN * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. and The mode switches as follows when the buttons are pressed: 1 2 3 PRO Information Adjusting the white balance RGB-GAIN . . . . . . . White balance adjustment for black level Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. COLOR TEMP. : PRO * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 22 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor. Example: Setting "NR-3" Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "PICTURE", then press the PROCEED button. Use the L and M buttons to select "NR". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. To delete the main menu, press the EXIT button once more. Information NR * "NR" stands for Noise Reduction. The effect becomes stronger as the number increases (in the order NR-1 NR-2 NR-3). Turns the noise reduction function off. R G : MEMORY :2 : OFF EXIT RETURN 3. The mode switches as follows when the and buttons are pressed: OFF NR-1 NR-2 NR-3 NR : NR-3 * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 23 Sound Settings Menu Adjusting the treble, bass and left/right balance The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "SOUND", then press the PROCEED button. Use the L and M buttons to select "BASS". SOUND BASS TREBLE BALANCE To continue adjusting the sound . . . [. . . ] * "Apple Macintosh" is a registered trademark of Apple Computer, Inc. of the United States. 53 Troubleshooting If the picture quality is poor or there is some other problem, check the adjustments, operations, etc. , before requesting service. Symptom Checks Remedy · Leave some space between the display and the connected components. · Point the remote control at the monitor's remote control sensor when pressing buttons, or remove the obstacle. · Eliminate the light by closing curtains, pointing the light in a different direction, etc. [. . . ]