User manual NEC NEX 2600

[. . . ] NEC 2600 Owner's Manual NEC 2600/2610 Quick Reference Guide Battery The phone battery should be charged before being used for the first time. for approximately two seconds to turn on the phone. Turn On Phone Press and hold the P key for approximately two seconds to turn off the phone. Turn Off Phone Press and hold the P key the contents of the menus and submenus. Select a menu item by pressing either M when the item is highlighted or by pressing the corresponding menu item number. Access and Navigate Menus Press M to display the main menu. Press I to view Standby Mode Once the phone is powered on, the phone enters the standby mode. The phone stays in the standby mode until a call is placed or received, a menu is accessed, or the phone is powered off. Use the keypad to enter a name associated with the phone number; press M. [. . . ] If you subscribe to more than one system, you can turn on or off access to the public, residential, or private system by pressing M453. As prompted, enter the 4-digit password (see "Phone Password" on page 3). Press M or the corresponding number (1, 2, or 3) to enable or disable access to each system. The phone automatically powers off and then powers on again with the selected network(s) activated. Note that if no selection changes are made, the phone does not power off and power on again when E is pressed. -34- Network Priority M454 Menu Shortcut If you subscribe to more than one system as described in "Activate Network" on page 34, you can prioritize access to residential, private, and public systems by pressing M454. Press I to highlight the systems listed in the number two or number three positions. Press M again, if necessary, to move the selected system up to the number one position. The phone automatically powers off and then powers on again with the systems operating in the specified priority settings. Menu Shortcut Clock M46 Set Clock M461 Menu Shortcut The clock can be set with the time, date, and year. To access the clock menu for setting the correct time and date, press M461. Key in the correct month by entering in the corresponding number from 1 through 12 for the desired month; press N. If the correct year is displayed, press E to save the clock entry and to exit the clock menu. 1 If the correct year is not displayed, key in the corresponding four digits of the correct year, and press E to save the time and date settings, and to exit the clock menu. 1. The year must be entered before the day when entering the date "February 29" during a leap year. -35- Set Alarm, Auto On, Auto Off M462 Menu Shortcut Your phone can be used as an alarm clock, and your phone can be set to automatically turn on or off at a specified time each day. To access the alarm or the auto on/off selections, press M462. Alarm Set Alarm: With the Auto On/Auto Off/Alarm setting screen displayed, press I until ALM is flashing; press M. If the alarm has been previously set, the last alarm time setting is automatically displayed. Turn Off Alarming Phone: Press C to turn off the phone alarm when it sounds. Deactivate Alarm Prior to Alarming: To turn off the alarm setting prior to the specified alarm time, press M462 and press I until ALM is flashing. Auto Power On/Auto Power Off Set Auto Power On/Auto Power Off: With the Auto On/Auto Off/Alarm setting screen displayed, press I until either ON or OFF is flashing; press M. If the auto power selection has been previously set, the last auto power setting is automatically displayed. Press C to save the auto power on or auto power off setting and exit the menu. The phone automatically turns on or turns off each day at the specified time setting. Deactivate Auto Power On/Auto Power Off: To deactivate the auto power on or auto power off setting, press M462, and press I until either ON or OFF is flashing. [. . . ] Dated proof of purchase is necessary to accompany and product returned for warranty service consideration. Valid proof of purchase must identify the point of purchase, date of purchase, Product model or trade name, and Electronic Serial Number or Mechanical Serial Number for transceivers and boosters. 4. How Long Does The Coverage Last? The warranty period for the Product is: [ONE (1) YEAR] Any Products repaired or replaced under the terms of this warranty are covered under the warranty for the remainder of the original warranty period or ninety (90) days from the date of service return shipping, whichever is longer. -58- 5. What Will The Manufacturer Do If The Product Becomes Defective In Materials Or Workmanship During The Warranty Period? If any Product covered under this warranty becomes defective in materials or workmanship during the applicable warranty period, NECAM will, at its option, either repair the defective product without charge for parts and labor, or provide a replacement in exchange for the defective Product. 6. (a) This warranty does not extend to: (i) Products which have been subjected to misuse, accident, physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion, or; (ii) Products which have been damaged due to repair, altered, or modified by anyone other than an authorized service warranty component-level representative of NECAM, or; (iii) Defects caused by components, parts, or accessories not compatible with the warranted Product, or; (iv) Products whose warranty/quality labels, product serial number plates or electronic serial numbers have been removed, altered, or rendered illegible, or; (v) Accessory items such as antenna, cables, curl cords, cases, etc. , or; (vi) Products shipped to NECAM for repair from outside the United States. [. . . ]