User manual NEC N341I

[. . . ] Do NOT use a dry cloth or electrostatically Emergency Services and Safety Precautions Emergency Services To make an emergency call in any country charged cloth. Do not use chemical or abrasive cleaners as these could damage the case. · Remember to recycle: the cardboard packaging supplied with this phone is ideal for recycling. Aircraft Safety · Switch off your phone and remove its battery when inside or near aircraft. It may be dangerous to the operation of the aircraft and it may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellphone service to the offender, or legal action, or both. [. . . ] Activating Volume keys On/off control of the Volume keys when your phone is folded shall be performed. When your phone is closed and the Volume key function is disabled, you cannot use Ring silencer function by pressing the Volume keys. See also: "Mute" on page 8 O With the standby screen displayed, press MENU 1, 1 and 5. Press 1 to enable or 2 to disable the Volume key function for when your phone is closed. ALS setup If your SIM card supports ALS (Alternate Line Service) you can setup which line to use, what they are called and automatic line selection. O See also: "Mute" on page 8 With the standby screen displayed, press voice mail option and . MENU 1, 1 and 6. Then use the and keys to highlight the desired option, desired Press Softkey 1 to save the changes and return to the Mode settings menu. 20 Time, date & alarm setting Your phone has the ability to store the time and date for two time zones: Home (Local time) or World (Remote time). This information is displayed in 12 or 24 hour format on the standby screen, and can be used to trigger an alarm and for scheduler. With the standby screen displayed, press MENU 1 and 6 before performing the following procedures. Show clock This option allows you to select the time that you prefer to display on the standby screen. Press 1 to display the Show clock screen. The number for the currently selected option is displayed in green. Press the appropriate key for the required option. Setting the Local time and Remote time Press 2 to display the Set time screen. Press Softkey 1 to save the changes. Setting the date O When you select 12 hour format, you need to select am/pm, too. Press 3 to display the Set date screen. Use the and keys to highlight the Day field and key in the 2 digits for day of the month. Use the and keys to highlight the Month field and key in the 2 digits for month. Use the and keys to highlight the Year field and key in the 4 digits for year. Press Softkey 1 to save the changes. 21 Setting the alarm Press 4 to display the Set alarm screen. Use the and keys to highlight the Set time field and key in the required alarm time. Use the and keys to highlight the Set alarm tone field and press to display the Alarm tone list screen. Press Softkey 1 to play the highlighted tone and press Softkey 2 to stop the tone sounding. Press to select the highlighted alarm tone and return to the Set alarm screen. The selected tone will be displayed in the Set alarm tone field. O O When the alarm is On, it sounds at the set time everyday. When you select 12 time format, you need to select am/pm, too. Use the and keys to highlight the Enter alarm text field and press Press Softkey 1 to activate the alarm. Setting format . Key in the alarm description and press . Press 5 to display the Set format screen. Use the and keys to highlight the preferred date format and press Use the and keys to highlight the preferred time format and press Press Softkey 1 to save the changes. Setting timezone . · If summer time can be set for the highlighted timezone, the Daylight savings will be displayed at the bottom of the screen. Press to activate/deactivate the setting (a in the box means the summer time is activated). Press Softkey 1 to save the changes. 22 Main-LCD settings The Main-LCD menu allows you to change the following settings. With the standby screen displayed, press displayed. MENU 1, 2 and 1. The Main-LCD menu screen will be Power on Greetings A type of greeting screen can be selected as follows: Press 1 to display the Greetings screen. [. . . ] Press Softkey 1 to rotate counter clockwise or Softkey 2 to rotate clockwise. Press 1 to overwrite the original image with the rotated image or 2 to save as a new file, then press . Then press Softkey 2 to check the capacity for saving the data with the selected quality. Press CLR to return to the previous screen. 87 Setting as Wallpaper This option enables you to set a picture to the Wallpaper for the standby screen. O See "Wallpaper" on page 23. With the Picture Options menu screen displayed, press 7. Sounds In the following section, how to playback and delete desired sound items is described. [. . . ]