User manual NEC MULTISYNC P1150

[. . . ] C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to C. S. A. Ce produit porte la marque `C-UL' et se conforme aux règlements de sûrele Canadiens selon CAN/CSA 22. 2 No. Use the attached specified shielded cables with the JC-2145UMA color monitor so as not to interfere with radio and television reception. Use of other cables and adapters may cause interference with radio and television reception. [. . . ] OSM Position: You can choose where you would like the OSM controls image to appear on your screen. Selecting OSM Position allows you to manually adjust the OSM controls menu left, right, up or down. OSM Turn Off: The OSM controls menu will stay on as long as it is in use. In the OSM Turn Off sub-menu, you can select how long the monitor waits after the last touch of a button to shut off the OSM controls menu. OSM Lock Out: This control completely locks out access to all OSM controls functions. When attempting to activate OSM controls while in the lock out mode, a screen will appear indicating that OSM controls are locked out. To activate the OSM Lock Out function, press PROCEED, then and hold down simultaneously. To deactivate the OSM Lock Out, press PROCEED, then and hold down simultaneously. IPMTM System Off Mode: Enable: The IPM System works normally and all stages of energy savings are utilized. NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE. Factory Preset: Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. A warning statement will appear to confirm that you do want to reset ALL settings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button. 4 78131622 6 7/29/98, 8:59 AM Controls Tools 2 Moire Canceler: Moire is a wavy pattern which can sometimes appear on the screen. When running certain applications, the wavy pattern is more evident than in others. To reduce moire, adjust the On/Level by using the +/- CONTROL buttons. Linearity: This selection allows you to adjust the spacing of the area on the screen. The purpose of this control is to ensure that a one-inch circle is a true one-inch circle wherever it is on the screen. The best way to determine the vertical linearity is as follows: · Draw equally spaced horizontal lines using a drawing application that has a ruler. · Use the Vertical control to adjust the spacing between the lines near the center of your screen. · Use the Vertical Balance control to adjust the lines near the top and bottom of your screen. Convergence: Aligns all three colors (R, G, B) to form a single color (white). The purpose of this control is to ensure that a white line drawn on the screen is as crisp and clear as possible. · Use the Horizontal control to adjust the alignment of the white lines in the up/down direction. · Use the Vertical control to adjust the alignment of the white lines in the left/right direction. GlobalSync® Control: Eliminates picture impurities that may result from the earth's magnetic field. Move the location of the control bar to the closest compass point that corresponds with the direction in which the CRT faces. [. . . ] Consumers are cautioned that Product performance is affected by system configuration, software, the application, customer data, and operator control of the system, among other factors. While NECTECH Products are considered to be compatible with many systems, specific functional implementation by the customers of the Product may vary. Therefore, suitability of a Product for a specific purpose or application must be determined by consumer and is not warranted by NECTECH. For the name of your nearest authorized NECTECH service facility, contact NECTECH at 1-800-632-4662. 9 78131622 11 7/29/98, 8:59 AM NEC Performance Series PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in these documents, including all designs and related materials, is the valuable property of NEC and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others. [. . . ]