User manual NEC MT1056

[. . . ] MT1056 LCD Projector User's Manual English P O W E R S TU S TA US B C CO NT RO L MO US OU E T RE CO MO NT R INPU PC -CAR D EN U ENTER O N /S TA N D B Y C AN S E CEL LE C T S O U R C M E A U TO A D JU S T AU DIO RG B OU MONI TP TO UT R AU DIO RG B IN AC PU T1 IN AU DIO S-VI DE O RG B IN PU T2 L/MO NO R VIDE O E­1 IMPORTANT INFORMATION Precautions Please read this manual carefully before using your NEC MT1056 Projector and keep the manual handy for future reference. Your serial number is located under the name plate label on the left side of your MT1056. Record it here: This label is located on the side of the remote control. CAUTION CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION Do not look into the laser pointer while it is on and do not point the laser beam at another person. [. . . ] Return to the previous screen without storing settings or adjustments. NOTE: You can close the main and sub menus simultaneously by pressing the PJ button to cancel the Projector mode. General Controls Before you turn on your projector, ensure that the computer or video source is turned on and that your lens cap is removed. 1. Turn on the Projector Plug the supplied power cable in the wall outlet. The projector will go into its standby mode and the power indicator will glow orange. Only after you press the "On" button on the remote control ("ON/ STAND BY" button on the projector cabinet) will the power indicator turn to green and the projector become ready to use. NOTE: To turn the projector on by plugging in the power cable, use the menu and enable the "Auto Start" feature. Repeat steps 2-5 to adjust an additional item, or press "Cancel" on the projector cabinet or the remote control to quit the menu display. 2. Select the Computer, Video Source or PC Card Viewer Press a source button on the remote control or the projector cabinet to select "Video" (VCR, document camera, or laser disc player), "S-Video", "RGB 1 or 2" (computer or DVD with component output) or "PC Card Viewer" to display the image. Or press the "Menu" button on the remote control or the cabinet and use the menu to select your video source: "Video", "S-Video", "RGB1 or 2", or "PC Card Viewer". Adjust the Image Size and the Focus Use the Zoom lever to adjust the image size, then use the Focus ring to obtain the best focus. Use the "Magnify" button (+) or (-) on the remote control to make the image larger up to 400%. Turning off the Projector First press the "off" button on the remote control ("ON/STAND BY" button on the projector cabinet) for a minimum of two seconds. The power indicator will go out. Using a USB Mouse Using a USB mouse gives you a smooth operation. NOTE: There may be some brands of USB mouse that the projector does not support. Operate the Menus using the USB mouse: Mouse Cursor: When connecting a USB mouse to the projector, you get a mouse cursor on the screen. Unless you use your USB mouse within 10 seconds, the mouse cursor disappears. Adjusting and Setting Display: You can select a menu item and click with a mouse button to make adjustments and setting. Examples: Click (or press and hold) the mouse button or to adjust the brightness. Or click and drag the mouse button on the slide bar horizontally to adjust it. If you click anywhere in the background while displaying adjustment and setting menu or dialog box, you will get the main menu at the clicking point. IMPORTANT: · The projector should be unplugged if it will not to be used for an extended period. · To turn off the image and sound briefly (five minutes or less), use the "Picture Mute" button instead of turning the projector off and on. · The projector will display a black, blue image or logo if no input signal is present. After the projector turns off, the cooling fans keep operating for a full minute. [. . . ] · Check to see if the projector has overheated or the lamp usage exceeds 1600 hours (up to 2600 hours in Eco mode). If there is insufficient ventilation around the projector or if the room where you're presenting is particularly warm, move the projector to a cooler location. · · · · · Use the menu to select your source (Video, S-Video, RGB1, RGB2 or PC Card Viewer). Reset the settings or adjustments to factory preset levels using the Factory Default on the Image Options Menu in Advanced menu. [. . . ]