User manual NEC MOBILEPRO 900

[. . . ] MobilePro 900 TM Handheld PC User's Guide NEC Solutions America Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Solutions (America), Inc. NECSAM and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NECSAM product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each such product is dependent upon factors such as system configuration, customer data, and operator control. [. . . ] Do not recharge batteries unless they are specifically designed for recharging. Do not use a battery that is damaged or deformed, has any rust on its casing, is discolored, overheats, or emits a foul odor. Caring for the MobilePro The MobilePro is a durable, dependable unit built for extensive use and travel. Follow these guidelines to maintain the condition and performance of your MobilePro. To prevent injury, immediately turn off and unplug the MobilePro under the following conditions: !Someone drops the unit or damages the casing. Introducing the MobilePro 2-15 Precautions Follow these precautions when using your MobilePro and AC adapter. ! Always plug the AC adapter cord into an easily accessible outlet. It is important to be able to easily shut off power by unplugging the AC adapter if needed. When using the AC adapter, make sure the power source falls within the unit's compatible range of 100-240 volts AC. (Watch for this when traveling to other countries. ) Turn off the MobilePro power before attaching or removing devices. Do not push any foreign objects into the MobilePro bays, connectors, and slots. Avoid using the unit or AC adapter for extended periods in direct sunlight. Avoid exposing the MobilePro or AC adapter to extreme changes in temperature or humidity. If it is unavoidable, allow your MobilePro to adjust to room temperature before use. When cleaning the system, use a soft, clean, slightly damp, almost dry cloth. Avoid wiping the display surface with abrasive material, including rough fabric. If the AC adapter becomes extremely hot, unplug the adapter and let it cool. Keep the AC adapter away from the IrDA port to ensure stable communication/transfer operations. !! ! ! ! 2-16 Introducing the MobilePro Storage Requirements Store the MobilePro and AC adapter in an environment that meets the following conditions. ! Maintain storage temperatures between 14°F and 140°F (­10°C and 60°C). If the temperature of the MobilePro suddenly rises or falls (for example, when you move the system from a cold place to a warm place) vapor condenses inside the system. Turning on the unit under this condition can damage the internal system components. Before turning on the MobilePro, wait until the unit's internal temperature equalizes with the new environment and any internal humidity evaporates. !Keep the MobilePro and its components away from organic solvents or corrosive gases. Avoid leaving the MobilePro and its components in direct sunlight or near heat sources. ! Routine Cleaning Clean or dust your system as follows. ! Display screen -- Carefully wipe the LCD screen with a soft cloth or a screen wipe designed for that purpose. Special screen wipes are available through your local computer dealer. Unit case -- Carefully wipe the case with a slightly damp, almost dry cloth. ! Never use harsh solutions, household cleaners, or spray cleaners that contain caustic materials on the MobilePro. [. . . ] The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. [. . . ]