User manual NEC LT260

[. . . ] CD-ROM version Portable Projector LT260/LT240/LT220 User's Manual About this user's manual The fastest way to get started is to take your time and do everything right the first time. At the beginning of each section of the manual you'll find an overview. If the section doesn't apply, you can skip it. INTRODUCTION Introduction to the Projector This section introduces you to your new LT260/LT240/LT220 Projector and describes the features and controls. Congratulations on Your Purchase of The LT260/LT240/ LT220 Projector The LT260/LT240/LT220 is one of the very best projectors available today. The LT260/LT240/LT220 enables you to project precise images up to 500 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player, document camera, a laser disc player or Viewer. [. . . ] Select "Source Name" and press ENTER to display the Source Name Edit window. Press [ ] to display the software keyboard, which you can enter alphanumeric characters. The following buttons are not available for the currently projecting signals: 1) The Cut and Paste buttons on the Entry Edit Command screen 2) The Input Terminal button on the Entry Edit screen All Delete: This feature enables you to delete all the registered signals in the Entry List. NOTE: When all the signals in the Entry List are deleted, the currently projected signal will be also deleted except locked signals. Select "Input Terminal" and press ENTER to display the Input Terminal window. E-84 USING ON-SCREEN MENU Menu Descriptions & Functions Picture (not available for Viewer and LAN) Adjusting Brightness, Contrast, Color, Hue, and Sharpness Brightness . . . . . . . Increases or decreases the color saturation level (not valid for RGB). This adjustment is only valid for Video and Component inputs (not valid for RGB). Volume Controllling Volume Adjusts the sound level of the projector speaker and AUDIO OUT. E-85 USING ON-SCREEN MENU Menu Descriptions & Functions Image Options Selecting Aspect Ratio (not available for Viewer and LAN) Aspect Ratio allows you to select the best Aspect mode to display your source image. When screen size 4:3 is selected for the source, the following selections will display: 4:3 . . . . . . . . . . . . . . . . . . . Reduced to display the true aspect with black borders on top and bottom Wide Screen . . . Left & Right stretched with black borders on top and bottom Crop . . . . . . . . . . . . . . . . When screen size 16:9 is selected for the source, the following selections will display: 4:3 Window . . . . . Reduced to display the true aspect with black borders on right and left Letter Box . . . . . . . . Left and right streched to display the true aspect 4:3 Fill . . . . . . . . . . . . . Stretched to display in 16:9 aspect ratio NOTE: You can adjust image positions vertically for source with black borders. Copyright Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with a "Aspect Ratio" or "Screen" setting may raise concern about the infringement of copyrights which are protected by copyright law. E-86 USING ON-SCREEN MENU Menu Descriptions & Functions NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available. Should this happen, first reset the 3D Reform data and then do setting again. Changing the aspect ratio can limit 3D Reform in its adjustable range. Input Signal Screen Type 4:3 Letter Box Squeeze 4:3 Screen 4:3 Letter Box Wide Screen Crop 16:9 Screen 4:3 Window 4:3 Fill Letter Box Wide Screen Masking Unwanted Area (Blanking) This feature allows you to mask any unwanted area of the screen image. NOTE: Adjustment of vertical display range Adjust the Top, Bottom, Left or Right blanking with the SELECT or button. Adjusting Position and Clock This allows you to manually adjust the image horizontally and vertically, and adjust Clock and Phase. Adjusts the image location horizontally and vertically using the SELECT and buttons. This adjustment is made automatically when the Auto Adjust is turned on. [. . . ] The lamp when used under normal operationg conditions is warranted for 1000 hours or six months, whichever comes first. WHO IS PROTECTED This warranty may be enforced only by the first purchaser, and is not transferable. WHAT IS COVERED AND WHAT IS NOT COVERED Except as specified below, this warranty covers all defects in material or workmanship in this product. NEC SOLUTIONS' LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT AT NEC SOLUTIONS' OPTION. The following are not covered by the limited warranty and NEC Solutions shall not be liable for: 1. or Canada by NEC Solutions or which is not purchased, installed, and operated in the U. S. A or Canada. [. . . ]