User manual NEC LCD73VX

[. . . ] This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. [. . . ] nOTE: As with all personal display devices , NEC Display Solution of America , Inc. Recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Your eyes should look slightly downward when viewing the middle of the screen. Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. Rest your eyes periodically by focusing on an object at least 20 feet away. Adjust the monitor tilt so that ceiling lights do not reflect on your screen. If reflected light makes it hard for you to see your screen, use an antiglare filter. Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing. ergonomics To realize the maximum ergonomics benefits , we recommend the following: · Use the preset Size and Position controls with standard signals · use the preset Color Setting · Use non-interlaced signals with a vertical refresh rate between 60-75Hz · Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue to insufficient contrast. cleaning the LCD Panel · When the liquid crystal panel becomes dusty or dirty, wipe grntly with a soft cloth. Do not apply pressure to the LCD surface · Dampen a soft cloth with water and a neutral detergent. Do not touch rubber or vinyl to the cabinet for a long period of time. These type of fluids and fanrics can cause the paint to deteriorate crack or peel. For more detailed information on setting up a healthy work environment, write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations ­ ANSI-HFS Standard No. Some systems may not support 720 x 400*1 : VGA text 640 x 480*1 at 60 Hz to 75 Hz all modes listed. *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. OSD (On-Screen Display) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple to use on-screen menus. NaViSetTM Software: NaViSet offers an expanded and intuitive graphical interface, allowing you to more easily adjust OSD display settings via mouse and keyboard. no-touch Auto AdjustTM: No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. ErgoDesign® Features: Enhance human ergonomics to improve the working environment, protect the health of the user and save money. [. . . ] Disposing of old NEC product The aim of recycling is to gain environmental benefits by means of reusing, upgrading, reconditioning, or reclaiming old material. dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product, in an environmentally sensitive way, once it has reached the end of its life. All required information concerning the disposal of the product and country-specific information can be found on our following websites: USA: http://www. [. . . ]