User manual NEC HT1000

[. . . ] HT1000 Entertainment Projector User's Manual English Deutsch Français Italiano Español Svenska IMPORTANT INFORMATION Safety Cautions Precautions Please read this manual carefully before using your NEC HT1000 Projector and keep the manual handy for future reference. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. [. . . ] Displays the Viewer Options dialog box on Page 2 of the Setup dialog box. Deletes a captured slide(s) or all the captured slides in the Capture - specific folder. Use the SLIDE +/- button to advance to the next slide or return to the previous slide. Folder Slide(Table) cursor (green marks) Slide Slide Slide Slide Slide Slide Slide Slide NOTE: If no memory card is inserted in the PC CARD slot, there is no signal, and a black, blue or logo background is displayed, depending on the setting. Playback is stopped when SLIDE +/- button on the remote control or button on the cabinet is pressed in Auto Play mode. The folder in the right bottom is always a folder exclusively for captured images, but is only displayed when images have been captured. NOTE: You can also use the folders or slides. 02 : 0004 / 0008 and button on the remote control to select E-27 Auto Play Mode If the "Auto Play" option is selected in "Viewer Options" of the menu, any given slide will start to play automatically. You can also specify Auto Play Interval between 5 and 300 seconds. Storing Images Displayed on the Projector on the PC card (Capture) The Capture features allows you to capture an image from a source that is currently being displayed. You can capture an image directly using the tool bar when the menu is not displayed. Switching to Slides Directly from Other Input Modes With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected. Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc. , it is possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer button. NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the Viewer, you will get the slide that has been retained. Viewing Digital Images Digital images can be played with the Viewer if the following conditions are met: · If the image can be stored on an MS-DOS format PC card · If the image can be stored in a format supported by the Viewer. With the Viewer, images on the card are searched for in directories and images in JPEG or BMP format are recognized as slides. Searchable directories are directories within two steps from the root directory, and searchable images are images within the first 12 files in the directory. Only file and slide switching are possible. NOTE: * Signals from DVI input are not possible to be captured. * Unless a PC card is inserted into the PC Card slot of the projector, the Capture feature is not available. * The "Card Error" display means that the free space of the PC card is insufficient for saving images. Make more space available on the card by erasing unwanted images with your PC. The number of images that can be captured depends on the size of the PC card. * Be sure not to turn off the power or remove the PC card while capturing an image. Doing so could cause a loss of the data in the PC card or damage to the card itself. Preparations: Insert the PC card into the card slot. Insert the PC card so that the end with the insertion direction arrow on the top goes in first. Select the "Capture" from the Tools menu. NOTE: The maximum number of images recognized as slides within one directory is 128. A tool bar will appear. The tool bar includes the following buttons: Capture Freeze Exit Capture . . . . . . . [. . . ] Regards. Application Sheet for TravelCare Service Program Country, product purchased : User's Company Name : User's Company Address : Phone No. , Fax No. : Local Contact office : Local Contact office Address : Phone No. , Fax No. on cabinet : Problem of units per User : Required Service : Requested period of Loan unit : Payment method : In Case of Credit Card : Card No. w/Valid Date : (1) Credit Card (2) Travelers Cheque (3) Cash (1) Repair and Return (2) Loan unit E-60 Condition of your TravelCare Service Program Enduser is requested to understand following condition of TravelCare Service Program and fill necessary information into the application sheet. [. . . ]